Cisco Systems 3110X, 3110G, 3012 manual 10/100/1000 Ethernet Ports, Catalyst Switch Module

Chapter 1 Product Overview

Hardware Features

The Catalyst Switch Module 3012 includes the 10/100/1000 Ethernet ports, console port, release latch, and the switch module LEDs shown in Figure 1-2and described on the following pages.

Figure 1-2 Catalyst Switch Module 3012

		1
2	C
	O
	O
	N
	S
	L M
	EO	!
3	D
	E
		LNK
4		15
		ACT
		LNK
		16
5		ACT
		LNK
		17
		ACT
6		LNK
		18
		ACT

270430

1	Catalyst Switch Module 3012	4	Switch module LEDs
2	Console port	5	10/100/1000 Ethernet ports
3	Mode button	6	Release latch

10/100/1000 Ethernet Ports

The Catalyst Switch Module 3110G and 3012 10/100/1000 Ethernet ports use standard RJ-45 connectors with Ethernet pinouts. The maximum cable length is 328 feet (100 meters). The 100BASE-TX and 1000BASE-T traffic requires Category 5, Category 5e, or Category 6 unshielded twisted pair (UTP) cable. The 10BASE-T traffic can use Category 3 or Category 4 UTP cable.

For information about the 10/100/1000 Ethernet port connections and specifications, see the “Connecting Devices to the Ethernet Ports” section on page 2-13and Appendix B, “Connector and Cable Specifications.”

Catalyst Switch Module 3110G, 3110X, and 3012 for IBM BladeCenter Hardware Installation Guide

OL-12192-01 1-3