Furuno GP-1850WF, GP-1850WDF manual Safety Instructions

Page 3

SAFETY INSTRUCTIONS

WARNING

Do not open the equipment.

Hazardous voltage which can cause electrical shock, burn or serious injury exists inside the equipment. Only qualified personnel should work inside the equipment.

Do not disassemble or modify the equipment.

Fire, electrical shock or serious injury can result.

Immediately turn off the power at the switchboard if the equipment is emitting smoke or fire.

Continued use of the equipment can cause fire or electrical shock. Contact a FURUNO agent for service.

Do not operate the equipment with wet hands.

Electrical shock can result.

Use the proper fuse.

Fuse rating is shown on the power cable. Use of a wrong fuse can result in damage to the equipment.

Do not maneuver the vessel based on the depth indication alone.

Grounding may result.

About the TFT LCD

The TFT LCD is constructed using the latest LCD techniques, and displays 99.99% of its pixels. The remaining 0.01% of the pixels may drop out or blink, how- ever this is not an indication of malfunc- tion.

CAUTION

Do not use the equipment for other than its intended purpose.

No one navigation device should ever be solely replied upon for the navigation of a vessel.

Always confirm position against all available aids to navigation, for safety of vessel and crew.

Do not turn on the equipment with the transducer out of water.

The transducer may be damaged.

Use the proper gain setting.

Incorrect gain may produce wrong depth indication, possibly result ing in a dangerous situation. See "Adjusting the gain" on page 2-6.

The picture is not refreshed when picture advancement is stopped.

Maneuvering the vessel in this condition may result in a dangerous situation.

A warning label is attached to the equip- ment. Do not remove the label. If the label is missing or illegible, contact

a FURUNO agent or dealer.

	WARNING	Name: Warning Label (1)
	WARNING	Type: 86-003-1011-1
	To avoid electrical shock, do not	Type: 86-003-1011-1
	remove cover. No user-serviceable	Code No.: 100-236-231
	parts inside.

i

Image 3

Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER 00080937000 Safety Instructions Table of Contents Routes IiiFeatures ForewordWord to GP-1850WDF/1850WF Owners Antenna Unit System ConfigurationWaas What is WAAS?Operational Overview Display Unit ControlsDisplay unit Remote Controller Direction of mini chart card Inserting Mini Chart CardTurning the Power On/Off Location of mini chart Card slot coverDisplay abbreviations Adjusting Tone and BrillianceTurning the power off Tone and brilliance adjustment windowDisplay modes plotter Plotter DisplaysDisplay modes Sounder display Sounder DisplaysTime display window Display setup 1 menuMenu Operation, Soft Keys Main menuDemo setting screen Demo mode windowDemonstration Display Video Sounder Operation Principle of OperationUnderwater conditions and video sounder display Sounder Display Description Normal sounder display indications, markersKHz picture Bottom-zoom display plus normal sounder display Selecting sounder display modeSounder function window Marker-zoom display plus normal sounder displayPlotter/Sounder Display Dual-frequency DisplayManual Sounder Operation Automatic Sounder OperationAdjusting the gain Selecting display rangeRange shifting Measuring Depth Suppressing InterferenceSuppressing Low Level Noise White Marker Erasing Weak EchoesSelecting Background and Echo Colors Selecting Picture Advance SpeedAlarms Fish school echoes Interpreting the DisplayZero line Minute markSurface noise/aeration Surface noise/AerationCourse-up Plotter DisplaysPresentation Modes North-upTurning on the cursor, shifting the cursor CursorShifting the Display Displaying Nav Information WindowChart icons and their meanings Selecting Chart Scale/RangeMini Chart Cards Indices and chart enlargementFuruno chart symbols Remarks on chart displayChart symbols Sample chart Japan and South Korea Showing indicesAid to navigation data Port service icons Nav-ChartsTMcardsNavigation data display Navigation Data DisplayEnlarging an indication GPS satellite monitor displayBeacon information display How to read the compass displaySteering Display Beacon information displayHighway Display How to read the XTE indicationSetting the range of the XTE scale XTE range setting windowPress the HIDE/SHOW key Changing Operation ModeSelecting fishing 1, fishing 2 mode Resetting trip distanceNavigation Trip Distance Stopping/Restarting Plotting of Track Chart setup menuTrack Displaying TrackTrack color window Changing Track ColorTrack Plotting Method, Interval Track plotting methodTrack memory window Changing Track Memory CapacityTrack plotting interval Interval windowErasing all track Erasing TracksErasing tracks by area Erasing tracks by colorChanging displays Plotter display MarkEntering Marks Plotter displayMark/line window Changing Mark AttributesVideo sounder display Changing displays Video sounder displayMark color window Chart details menuChanging Mark Size Mark line windowErasing Marks Displaying Track and Mark PointsTarget Mark Entering waypoints at MOB position WaypointsEntering Waypoints Entering waypoints at own ship’s positionMark color selection window Waypoints menuWaypoint window Mark shape selection windowEntering waypoints by range and bearing Erasing waypoints through the waypoint list Erasing Individual WaypointsEntering waypoints by latitude and longitude position Erasing waypoints by the cursorChanging Waypoint Position on the Plotter Display Changing Waypoint DataWaypoint Mark Size Searching WaypointsSearch window Route menu RoutesEntering Routes Entering routes through the route listConnecting Routes Entering routes by the cursorConnect route window Edit route menu Inserting, Removing WaypointsInserting waypoints through the route list Changing waypoints through the listRemoving waypoints from routes Inserting waypoints on the plotter displayNew route window Route contents displayCreating Track-based Routes Save route menuErasing Routes Navigating to a single quick point NavigationNavigating to Quick Points Selecting quick point entry methodSample port list southern Italy Navigating to Ports, Port ServicesNavigating to Waypoints waypoint list Plotter displaySample filling station locations southern Italy Sample port service listNavigate route waypoints in reverse order Following a RouteNavigate along specific leg of route Restarting navigationSetting speed for ETA calculation Switching waypointsSelect speed for ETA window Canceling Navigation Audio alarm window Plotter AlarmsAudio Alarm On/Off Alarm menuAnchor Watch Alarm Arrival AlarmXTE Cross Track Error Alarm Speed AlarmProximity Alarm Alarm Information Alarm messagesAlarm messages and their meanings Download/upload menu Memory Card OperationsFormatting Memory Cards 10-1Save Data message Saving Data to Memory Card10-2 Saving dataData overwrite Error messagesLoading Data from Memory Card 10-3Mark/line Configuration10-4 Waypoint/route11-1 Chart Setup Options menuChart Offset menu Customizing Your UnitChart Details menu Chart details menu description11-2 Display Setup 1 menu description Display Options menu11-3 Mag variation window Display Setup 2 menu descriptionDisplay setup 2 menu 11-411-5 GPS Setup Options menu descriptionGPS Setup options menu 11.3 GPS/DGPS/TD Options menuGeodetic datum window 11-6DGPS/WAAS Setup Options menu 11-7DGPS/WAAS menu Displaying Decca TDs TD Setup menu11-8 Displaying Loran C TDs11-9 Sounder Setup Options menuSystem Setup soft key Range Setup soft keyTVG concept 11-10Echo Offset 200kHz, Echo Offset 50kHz Seabed LVL 200kHz, Seabed LVL 50kHz11-11 Configuration menuSetup Nmea Port 1 menu description Setup NMEA/DGPS Port 2 menu descriptionDisplay unit, rear view 11-12UPLOAD/DOWNLOAD Data menu Upload/download menuCharacter available for comment 11-13Connection of GP-1850WDF/GP-1850WF to PC Waypoint data formatEnd of sentence 11-14Route data format Route comment format12-1 Using C-MAP NT ModelInserting Chart Card Location of chart card slot coverExample of caution area window Cursor and Data Display12-2 Objects window12-3 Tidal Information12-4 Date windowSET GO to Method window Make route window Select Port Service window12-5 Sample filling station locationsSector info Setting Chart Setup OptionsLighthouse appearance when sector info is off 12-6Depth info display 12-7Displaying Program Number 12-8Memory, I/O test results 13-1 Maintenance & TroubleshootingMaintenance Recommended maintenance program13-2 Replacement of Fuse, BatterySimple Troubleshooting Simple troubleshooting plotter13-3 Error MessagesSimple troubleshooting sounder Error messagesTest menu Diagnostic Tests13-4 Memory, I/O port testKeyboard test 13-5Keyboard test Display test13-6 Remote controller testRemote controller test Clearing MemoriesMenu Tree Default settings shown in bold italicMenu Tree 2 By soft key Next GRI Loran C ChainsChain Location Code Decca ChainsWorld Time OLD HAWAIIAN-OA Geodetic Chart ListThis page is intentionally left blank General Coating Color Index-1 IndexIndications Index-2Index-3 Index-4