Furuno GP-1850WDF, GP-1850WF manual 11-14, Route data format, Route comment format, End of sentence

11. CUSTOMIZING YOUR UNIT

Route data menu

$GPRTE, x, x, a, ccc, c				----	----c, c		----c, ... , c c <CR><LF>
1	2	3	4	5		6		12

Route data format

1:Number of sentences required for one complete route data (1 to 4). See Note 2.

2:Number of sentences currently used (1 to 4)

3:Message mode (Always set to C)

4:Route No. (001 to 300, 3 digits required) 5 through 12: Waypoint name (Max. 8 names, length of each waypoint name is fixed to 7 byte)

Note 2: A route can may contain 35 waypoints and GPRTE sentence for one route data may exceed 80 byte limitation. In this case, route data is divided into several GPRTE sentences (Max. 4 sentences). This value shows the number of sentences the route data has been divided.

Route comment data format

$PFEC, GPrtc, xx, c----c <CR><LF>

1 2

Route comment format

1:Route No. (01 to 200, 3 digits required)

2:Route comment (Max. 16 characters, variable length)

The same characters of the comment for waypoint comment can be used.

End of sentence

$PFEC, GPxfr, CTL, E <CR><LF>

End of sentence

11-14