Furuno GP-1850WF Displaying Track, Stopping/Restarting Plotting of Track, Chart setup menu

Page 39

4. TRACK

4.1Displaying Track

1.Press the [MENU] key to open the main menu.

MENU

CHART SETUP OPTIONS

DISPLAY OPTIONS

GPS/DGPS/TD OPTIONS

SOUNDER SETUP OPTIONS

DGPS 3D CONFIGURATION

Main menu

2.Press the CHART SETUP OPTIONS soft key to open the CHART SETUP OPTIONS menu.

CHART

SETUP

CHART OFFSET

TRACK CONTROL

CHART DETAILS

		RETURN
DGPS 3D		RETURN

Chart setup menu

3.Press the TRACK CONTROL soft key to open the TRACK CONTROL menu.

4.Press ▲ to select DISPLAY TRACK.

5.Press the EDIT soft key to show the display track window.

6.Press ▲ or ▼ to select ON or OFF as appropriate.

7.Press the ENTER soft key or the [ENTER] key.

8.Press the [PLOT] key to close the menu.

The default setting is ON, which traces ship’s track in accordance with ship’s movements.

Number of track and mark points used appears in the TRACK STATUS window on the TRACK CONTROL menu. Using the illustration at the bottom of the page as an example, it shows that 1000 out of 2000 track points and 5 out of 3000 mark shave been used.

4.2Stopping/Restarting Plotting of Track

When your boat is at anchor or returning to port you probably won’t need to record its track. You can stop recording the track, to conserve the track memory, as follows:

1. Press the [MENU] key followed by the

CHART SETUP OPTIONS and TRACK

CONTROL soft key.

	DISPLAY TRACK		ON
	DISPLAY TRACK		ON
	TRACK COLOR		WHITE
	PLOT		TIME
	TIME INTERVAL		01m00s
	DIST INTERVAL		00.10 nm
	TRACK MEMORY		2000 POINTS
	(MARK MEMORY) (3000) POINTS

	TRACK STATUS
	TRACKING
	TRACK : 1000 / 2000 PTS used
	MARK :	5 / 3000 PTS used

DGPS 3D

TRACK CONTROL

EDIT

STOP

TRACK

ERASE

T & M

RETURN

2. Press the STOP TRACK soft key. The

indication “TRACKING” in the TRACK

STATUS window changes to “NOT

TRACKING”.

On the plotter display, H icon appears.

To restart recording the track, press the START TRACK soft key at step 2 in the above procedure.

Track control menu

4-1

Image 39

Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER 00080937000 Safety Instructions Table of Contents Routes IiiFeatures ForewordWord to GP-1850WDF/1850WF Owners Antenna Unit System ConfigurationWaas What is WAAS?Operational Overview Display Unit ControlsDisplay unit Remote Controller Direction of mini chart card Inserting Mini Chart CardTurning the Power On/Off Location of mini chart Card slot coverDisplay abbreviations Adjusting Tone and BrillianceTurning the power off Tone and brilliance adjustment windowDisplay modes plotter Plotter DisplaysDisplay modes Sounder display Sounder DisplaysTime display window Display setup 1 menuMenu Operation, Soft Keys Main menuDemo setting screen Demo mode windowDemonstration Display Video Sounder Operation Principle of OperationUnderwater conditions and video sounder display Sounder Display Description Normal sounder display indications, markersKHz picture Bottom-zoom display plus normal sounder display Selecting sounder display modeSounder function window Marker-zoom display plus normal sounder displayPlotter/Sounder Display Dual-frequency DisplayManual Sounder Operation Automatic Sounder OperationAdjusting the gain Selecting display rangeRange shifting Measuring Depth Suppressing InterferenceSuppressing Low Level Noise White Marker Erasing Weak EchoesSelecting Background and Echo Colors Selecting Picture Advance SpeedAlarms Fish school echoes Interpreting the DisplayZero line Minute markSurface noise/aeration Surface noise/AerationCourse-up Plotter DisplaysPresentation Modes North-upTurning on the cursor, shifting the cursor CursorShifting the Display Displaying Nav Information WindowChart icons and their meanings Selecting Chart Scale/RangeMini Chart Cards Indices and chart enlargementFuruno chart symbols Remarks on chart displayChart symbols Sample chart Japan and South Korea Showing indicesAid to navigation data Port service icons Nav-ChartsTMcardsNavigation data display Navigation Data DisplayEnlarging an indication GPS satellite monitor displayBeacon information display How to read the compass displaySteering Display Beacon information displayHighway Display How to read the XTE indicationSetting the range of the XTE scale XTE range setting windowPress the HIDE/SHOW key Changing Operation ModeSelecting fishing 1, fishing 2 mode Resetting trip distanceNavigation Trip Distance Stopping/Restarting Plotting of Track Chart setup menuTrack Displaying TrackTrack color window Changing Track ColorTrack Plotting Method, Interval Track plotting methodTrack memory window Changing Track Memory CapacityTrack plotting interval Interval windowErasing all track Erasing TracksErasing tracks by area Erasing tracks by colorChanging displays Plotter display MarkEntering Marks Plotter displayMark/line window Changing Mark AttributesVideo sounder display Changing displays Video sounder displayMark color window Chart details menuChanging Mark Size Mark line windowErasing Marks Displaying Track and Mark PointsTarget Mark Entering waypoints at MOB position WaypointsEntering Waypoints Entering waypoints at own ship’s positionMark color selection window Waypoints menuWaypoint window Mark shape selection windowEntering waypoints by range and bearing Erasing waypoints through the waypoint list Erasing Individual WaypointsEntering waypoints by latitude and longitude position Erasing waypoints by the cursorChanging Waypoint Position on the Plotter Display Changing Waypoint DataWaypoint Mark Size Searching WaypointsSearch window Route menu RoutesEntering Routes Entering routes through the route listConnecting Routes Entering routes by the cursorConnect route window Edit route menu Inserting, Removing WaypointsInserting waypoints through the route list Changing waypoints through the listRemoving waypoints from routes Inserting waypoints on the plotter displayNew route window Route contents displayCreating Track-based Routes Save route menuErasing Routes Navigating to a single quick point NavigationNavigating to Quick Points Selecting quick point entry methodSample port list southern Italy Navigating to Ports, Port ServicesNavigating to Waypoints waypoint list Plotter displaySample filling station locations southern Italy Sample port service listNavigate route waypoints in reverse order Following a RouteNavigate along specific leg of route Restarting navigationSetting speed for ETA calculation Switching waypointsSelect speed for ETA window Canceling Navigation Audio alarm window Plotter AlarmsAudio Alarm On/Off Alarm menuAnchor Watch Alarm Arrival AlarmXTE Cross Track Error Alarm Speed AlarmProximity Alarm Alarm Information Alarm messagesAlarm messages and their meanings Download/upload menu Memory Card OperationsFormatting Memory Cards 10-1Save Data message Saving Data to Memory Card10-2 Saving dataData overwrite Error messagesLoading Data from Memory Card 10-3Mark/line Configuration10-4 Waypoint/route11-1 Chart Setup Options menuChart Offset menu Customizing Your UnitChart Details menu Chart details menu description11-2 Display Setup 1 menu description Display Options menu11-3 Mag variation window Display Setup 2 menu descriptionDisplay setup 2 menu 11-411-5 GPS Setup Options menu descriptionGPS Setup options menu 11.3 GPS/DGPS/TD Options menuGeodetic datum window 11-6DGPS/WAAS Setup Options menu 11-7DGPS/WAAS menu Displaying Decca TDs TD Setup menu11-8 Displaying Loran C TDs11-9 Sounder Setup Options menuSystem Setup soft key Range Setup soft keyTVG concept 11-10Echo Offset 200kHz, Echo Offset 50kHz Seabed LVL 200kHz, Seabed LVL 50kHz11-11 Configuration menuSetup Nmea Port 1 menu description Setup NMEA/DGPS Port 2 menu descriptionDisplay unit, rear view 11-12UPLOAD/DOWNLOAD Data menu Upload/download menuCharacter available for comment 11-13Connection of GP-1850WDF/GP-1850WF to PC Waypoint data formatEnd of sentence 11-14Route data format Route comment format12-1 Using C-MAP NT ModelInserting Chart Card Location of chart card slot coverExample of caution area window Cursor and Data Display12-2 Objects window12-3 Tidal Information12-4 Date windowSET GO to Method window Make route window Select Port Service window12-5 Sample filling station locationsSector info Setting Chart Setup OptionsLighthouse appearance when sector info is off 12-6Depth info display 12-7Displaying Program Number 12-8Memory, I/O test results 13-1 Maintenance & TroubleshootingMaintenance Recommended maintenance program13-2 Replacement of Fuse, BatterySimple Troubleshooting Simple troubleshooting plotter13-3 Error MessagesSimple troubleshooting sounder Error messagesTest menu Diagnostic Tests13-4 Memory, I/O port testKeyboard test 13-5Keyboard test Display test13-6 Remote controller testRemote controller test Clearing MemoriesMenu Tree Default settings shown in bold italicMenu Tree 2 By soft key Next GRI Loran C ChainsChain Location Code Decca ChainsWorld Time OLD HAWAIIAN-OA Geodetic Chart ListThis page is intentionally left blank General Coating Color Index-1 IndexIndications Index-2Index-3 Index-4