Furuno GP-1850WF Memory Card Operations, Formatting Memory Cards, 10-1, Download/upload menu

Page 69

10. MEMORY CARD OPERATIONS

The following data can be saved to memory cards:

•Mark/line

•Waypoints/routes

•Track

•Configuration (menu settings)

10.1Formatting Memory Cards

Before you can use a memory card it must be formatted. Note that formatting a used card erases all saved data.

1.Turn the power off.

2.Insert the memory card you want to format into the slot.

3.Turn the power on.

4.Press the [MENU] key followed by the CONFIGURATION and UPLOAD/DOWNLOAD DATA soft keys.

DWNLOAD

UPLOAD

DOWN WPT/RTE TO PC

UPLOAD WPT/RTE FROM PC

SAVE DATA TO MEMORY CARD

LOAD DATA FROM MEMORY CARD

DGPS 3D		RETURN

Download/upload menu

5.Press the SAVE DATA TO MEMORY CARD.

		SAVE
TRACK	OFF	SAVE
TRACK	OFF	DATA

MARK/LINE

OFF

EDIT

	WAYPOINT/ROUTE	OFF	SAVE
			SAVE
			DATA
			DATA
	CONFIGURATION	OFF


			FORMAT


DGPS 3D			RETURN

Save data display

6.Press the FORMAT soft keys. You are asked if you are ready to format the memory card.

10-1

Image 69

Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER 00080937000 Safety Instructions Table of Contents Routes IiiFeatures ForewordWord to GP-1850WDF/1850WF Owners Antenna Unit System ConfigurationWaas What is WAAS?Operational Overview Display Unit ControlsDisplay unit Remote Controller Turning the Power On/Off Inserting Mini Chart CardLocation of mini chart Card slot cover Direction of mini chart cardTurning the power off Adjusting Tone and BrillianceTone and brilliance adjustment window Display abbreviationsDisplay modes plotter Plotter DisplaysDisplay modes Sounder display Sounder DisplaysMenu Operation, Soft Keys Display setup 1 menuMain menu Time display windowDemo setting screen Demo mode windowDemonstration Display Video Sounder Operation Principle of OperationUnderwater conditions and video sounder display Sounder Display Description Normal sounder display indications, markersKHz picture Sounder function window Selecting sounder display modeMarker-zoom display plus normal sounder display Bottom-zoom display plus normal sounder displayPlotter/Sounder Display Dual-frequency DisplayManual Sounder Operation Automatic Sounder OperationAdjusting the gain Selecting display rangeRange shifting Measuring Depth Suppressing InterferenceSuppressing Low Level Noise White Marker Erasing Weak EchoesSelecting Background and Echo Colors Selecting Picture Advance SpeedAlarms Zero line Interpreting the DisplayMinute mark Fish school echoesSurface noise/aeration Surface noise/AerationPresentation Modes Plotter DisplaysNorth-up Course-upShifting the Display CursorDisplaying Nav Information Window Turning on the cursor, shifting the cursorMini Chart Cards Selecting Chart Scale/RangeIndices and chart enlargement Chart icons and their meaningsChart symbols Remarks on chart displaySample chart Japan and South Korea Showing indices Furuno chart symbolsAid to navigation data Port service icons Nav-ChartsTMcardsEnlarging an indication Navigation Data DisplayGPS satellite monitor display Navigation data displaySteering Display How to read the compass displayBeacon information display Beacon information displaySetting the range of the XTE scale How to read the XTE indicationXTE range setting window Highway DisplayPress the HIDE/SHOW key Changing Operation ModeSelecting fishing 1, fishing 2 mode Resetting trip distanceNavigation Trip Distance Track Chart setup menuDisplaying Track Stopping/Restarting Plotting of TrackTrack Plotting Method, Interval Changing Track ColorTrack plotting method Track color windowTrack plotting interval Changing Track Memory CapacityInterval window Track memory windowErasing tracks by area Erasing TracksErasing tracks by color Erasing all trackEntering Marks MarkPlotter display Changing displays Plotter displayVideo sounder display Changing Mark AttributesChanging displays Video sounder display Mark/line windowChanging Mark Size Chart details menuMark line window Mark color windowErasing Marks Displaying Track and Mark PointsTarget Mark Entering Waypoints WaypointsEntering waypoints at own ship’s position Entering waypoints at MOB positionWaypoint window Waypoints menuMark shape selection window Mark color selection windowEntering waypoints by range and bearing Entering waypoints by latitude and longitude position Erasing Individual WaypointsErasing waypoints by the cursor Erasing waypoints through the waypoint listChanging Waypoint Position on the Plotter Display Changing Waypoint DataWaypoint Mark Size Searching WaypointsSearch window Entering Routes RoutesEntering routes through the route list Route menuConnecting Routes Entering routes by the cursorConnect route window Inserting waypoints through the route list Inserting, Removing WaypointsChanging waypoints through the list Edit route menuRemoving waypoints from routes Inserting waypoints on the plotter displayCreating Track-based Routes Route contents displaySave route menu New route windowErasing Routes Navigating to Quick Points NavigationSelecting quick point entry method Navigating to a single quick pointNavigating to Waypoints waypoint list Navigating to Ports, Port ServicesPlotter display Sample port list southern ItalySample filling station locations southern Italy Sample port service listNavigate along specific leg of route Following a RouteRestarting navigation Navigate route waypoints in reverse orderSetting speed for ETA calculation Switching waypointsSelect speed for ETA window Canceling Navigation Audio Alarm On/Off Plotter AlarmsAlarm menu Audio alarm windowAnchor Watch Alarm Arrival AlarmXTE Cross Track Error Alarm Speed AlarmProximity Alarm Alarm Information Alarm messagesAlarm messages and their meanings Formatting Memory Cards Memory Card Operations10-1 Download/upload menu10-2 Saving Data to Memory CardSaving data Save Data messageLoading Data from Memory Card Error messages10-3 Data overwrite10-4 ConfigurationWaypoint/route Mark/lineChart Offset menu Chart Setup Options menuCustomizing Your Unit 11-1Chart Details menu Chart details menu description11-2 Display Setup 1 menu description Display Options menu11-3 Display setup 2 menu Display Setup 2 menu description11-4 Mag variation windowGPS Setup options menu GPS Setup Options menu description11.3 GPS/DGPS/TD Options menu 11-5Geodetic datum window 11-6DGPS/WAAS Setup Options menu 11-7DGPS/WAAS menu 11-8 TD Setup menuDisplaying Loran C TDs Displaying Decca TDsSystem Setup soft key Sounder Setup Options menuRange Setup soft key 11-9Echo Offset 200kHz, Echo Offset 50kHz 11-10Seabed LVL 200kHz, Seabed LVL 50kHz TVG conceptSetup Nmea Port 1 menu description Configuration menuSetup NMEA/DGPS Port 2 menu description 11-11UPLOAD/DOWNLOAD Data menu 11-12Upload/download menu Display unit, rear viewConnection of GP-1850WDF/GP-1850WF to PC 11-13Waypoint data format Character available for commentRoute data format 11-14Route comment format End of sentenceInserting Chart Card Using C-MAP NT ModelLocation of chart card slot cover 12-112-2 Cursor and Data DisplayObjects window Example of caution area window12-3 Tidal Information12-4 Date windowSET GO to Method window 12-5 Select Port Service windowSample filling station locations Make route windowLighthouse appearance when sector info is off Setting Chart Setup Options12-6 Sector infoDepth info display 12-7Displaying Program Number 12-8Memory, I/O test results Maintenance Maintenance & TroubleshootingRecommended maintenance program 13-1Simple Troubleshooting Replacement of Fuse, BatterySimple troubleshooting plotter 13-2Simple troubleshooting sounder Error MessagesError messages 13-313-4 Diagnostic TestsMemory, I/O port test Test menuKeyboard test 13-5Display test Keyboard testRemote controller test Remote controller testClearing Memories 13-6Menu Tree Default settings shown in bold italicMenu Tree 2 By soft key Next GRI Loran C ChainsChain Location Code Decca ChainsWorld Time OLD HAWAIIAN-OA Geodetic Chart ListThis page is intentionally left blank General Coating Color Index-1 IndexIndications Index-2Index-3 Index-4