Furuno GP-1850WF, GP-1850WDF 12-5, Select Port Service window, Sample filling station locations

7.Press the NEAR SRVICE soft key. The SELECT PORT SERVICE window appears.

Currently selected icon

SELECT PORT SERVICE

Health emergency

SELECT PORT SERVICE window

8.Use the cursor pad to select service mark desired. Currently selected icon is circumscribed. The name of currently selected icon appears at the top of the window. Refer to the user's manual of C-MAP NT for details about the icons.

9.Press the ENTER soft key or the [ENTER] key. Then, the display shows the locations of those services nearest you.

				GO TO
+	40˚45.971'N	FROM	0.26 nm
	13˚57.462'E	OS	180.2˚

PUNTA CORNACCHIA
ACCO AMENO	ENTER
ISCHIA PORTO
CASAMICCIOLA
I. ISCHIA	CANCEL
SELECT ICON BY
DGPS 3D KEY.	GO TO

Sample filling station locations

10.Press ▲ or ▼ to place the "hand cursor" on the port service icon desired and press the ENTER soft key or the [ENTER] key.

12. USING C-MAP NT MODEL

+	40˚45.971'N	FROM	0.26 nm	GO TO
	13˚57.462'E	QP<01>	180.2˚
				ZOOM
				IN
				ZOOM
				OUT
PUNTA CORNACCHIA
	ACCO AMENO			ADD
		ISCHIA PORTO		QP
				ERASE
	CASAMICCIOLA			LST QP
		I. ISCHIA		CANCEL
DGPS 3D		USE SOFT KEYS TO MAKE		GO TO
		ROUTE THEN PRESS "ENTER"

Make route window

11.Do one of the following:

Go directly to port service selected: Press the [ENTER] key. The own ship and the port service is connected by a blue line. The range and bearing from own ship to the port service appears at the navigation data display.

You can go to the port service directly by steering the ship to the heading indicated.

Go to port service selected via waypoints, make a route as follows:

a)Move the cursor to the nearest waypoint of the port service.

b)Press the ADD QP soft key.

c)Repeat the above steps a) and b) to enter other waypoints.

d)Press the [ENTER] key to finish. A line connects between own ship, waypoints and the port service. Further, the range and bearing from own ship to first waypoint appears.

Note: Destination is automatically cancelled if there is no port for service selected.

12-5