Furuno GP-1850WDF, GP-1850WF manual 10-4, Waypoint/route, Mark/line, Configuration

Page 72

10. MEMORY CARD OPERATIONS

NOW LOADING DATA FROM

MEMORY CARD. DO NOT

TURN OFF THE POWER UNTIL

LOADING COMPLETE.

Load data message

After loading is completed, the following message appears.

COMPLETE LOADING DATA.

PRESS "ENTER" KEY

TO CONTINUE.

Complete message

7. Press the [ENTER] key.

Notes on loading data

Track

Since loaded track data is added to internal track, oldest track in the memory of the unit will be deleted when the track memory capacity is exceeded.

Waypoint/route

Waypoints/routes in the memory of the unit are deleted to make room for loaded ones.

Mark/line

The loaded data is added to internal data. When the mark/line memory becomes full, no marks may be entered.

Configuration

The loaded data replaces current configuration settings. Press the [ENTER] key to restart. If the memory card is ejected while loading, or data could not be loaded, press the [ENTER] key to restart with default settings. Note that the track memory capacity setting is not saved nor loaded.

10-4

Image 72

Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER 00080937000 Safety Instructions Table of Contents Iii RoutesFeatures ForewordWord to GP-1850WDF/1850WF Owners System Configuration Antenna UnitWhat is WAAS? WaasOperational Overview Display Unit ControlsDisplay unit Remote Controller Inserting Mini Chart Card Turning the Power On/OffLocation of mini chart Card slot cover Direction of mini chart cardAdjusting Tone and Brilliance Turning the power offTone and brilliance adjustment window Display abbreviationsPlotter Displays Display modes plotterSounder Displays Display modes Sounder displayDisplay setup 1 menu Menu Operation, Soft KeysMain menu Time display windowDemo setting screen Demo mode windowDemonstration Display Video Sounder Operation Principle of OperationUnderwater conditions and video sounder display Sounder Display Description Normal sounder display indications, markersKHz picture Selecting sounder display mode Sounder function windowMarker-zoom display plus normal sounder display Bottom-zoom display plus normal sounder displayDual-frequency Display Plotter/Sounder DisplayAutomatic Sounder Operation Manual Sounder OperationAdjusting the gain Selecting display rangeRange shifting Measuring Depth Suppressing InterferenceSuppressing Low Level Noise Erasing Weak Echoes White MarkerSelecting Picture Advance Speed Selecting Background and Echo ColorsAlarms Interpreting the Display Zero lineMinute mark Fish school echoesSurface noise/Aeration Surface noise/aerationPlotter Displays Presentation ModesNorth-up Course-upCursor Shifting the DisplayDisplaying Nav Information Window Turning on the cursor, shifting the cursorSelecting Chart Scale/Range Mini Chart CardsIndices and chart enlargement Chart icons and their meaningsRemarks on chart display Chart symbolsSample chart Japan and South Korea Showing indices Furuno chart symbolsPort service icons Nav-ChartsTMcards Aid to navigation dataNavigation Data Display Enlarging an indicationGPS satellite monitor display Navigation data displayHow to read the compass display Steering DisplayBeacon information display Beacon information displayHow to read the XTE indication Setting the range of the XTE scaleXTE range setting window Highway DisplayChanging Operation Mode Press the HIDE/SHOW keySelecting fishing 1, fishing 2 mode Resetting trip distanceNavigation Trip Distance Chart setup menu TrackDisplaying Track Stopping/Restarting Plotting of TrackChanging Track Color Track Plotting Method, IntervalTrack plotting method Track color windowChanging Track Memory Capacity Track plotting intervalInterval window Track memory windowErasing Tracks Erasing tracks by areaErasing tracks by color Erasing all trackMark Entering MarksPlotter display Changing displays Plotter displayChanging Mark Attributes Video sounder displayChanging displays Video sounder display Mark/line windowChart details menu Changing Mark SizeMark line window Mark color windowErasing Marks Displaying Track and Mark PointsTarget Mark Waypoints Entering WaypointsEntering waypoints at own ship’s position Entering waypoints at MOB positionWaypoints menu Waypoint windowMark shape selection window Mark color selection windowEntering waypoints by range and bearing Erasing Individual Waypoints Entering waypoints by latitude and longitude positionErasing waypoints by the cursor Erasing waypoints through the waypoint listChanging Waypoint Data Changing Waypoint Position on the Plotter DisplayWaypoint Mark Size Searching WaypointsSearch window Routes Entering RoutesEntering routes through the route list Route menuConnecting Routes Entering routes by the cursorConnect route window Inserting, Removing Waypoints Inserting waypoints through the route listChanging waypoints through the list Edit route menuInserting waypoints on the plotter display Removing waypoints from routesRoute contents display Creating Track-based RoutesSave route menu New route windowErasing Routes Navigation Navigating to Quick PointsSelecting quick point entry method Navigating to a single quick pointNavigating to Ports, Port Services Navigating to Waypoints waypoint listPlotter display Sample port list southern ItalySample port service list Sample filling station locations southern ItalyFollowing a Route Navigate along specific leg of routeRestarting navigation Navigate route waypoints in reverse orderSetting speed for ETA calculation Switching waypointsSelect speed for ETA window Canceling Navigation Plotter Alarms Audio Alarm On/OffAlarm menu Audio alarm windowArrival Alarm Anchor Watch AlarmXTE Cross Track Error Alarm Speed AlarmProximity Alarm Alarm Information Alarm messagesAlarm messages and their meanings Memory Card Operations Formatting Memory Cards10-1 Download/upload menuSaving Data to Memory Card 10-2Saving data Save Data messageError messages Loading Data from Memory Card10-3 Data overwriteConfiguration 10-4Waypoint/route Mark/lineChart Setup Options menu Chart Offset menuCustomizing Your Unit 11-1Chart Details menu Chart details menu description11-2 Display Setup 1 menu description Display Options menu11-3 Display Setup 2 menu description Display setup 2 menu11-4 Mag variation windowGPS Setup Options menu description GPS Setup options menu11.3 GPS/DGPS/TD Options menu 11-511-6 Geodetic datum windowDGPS/WAAS Setup Options menu 11-7DGPS/WAAS menu TD Setup menu 11-8Displaying Loran C TDs Displaying Decca TDsSounder Setup Options menu System Setup soft keyRange Setup soft key 11-911-10 Echo Offset 200kHz, Echo Offset 50kHzSeabed LVL 200kHz, Seabed LVL 50kHz TVG conceptConfiguration menu Setup Nmea Port 1 menu descriptionSetup NMEA/DGPS Port 2 menu description 11-1111-12 UPLOAD/DOWNLOAD Data menuUpload/download menu Display unit, rear view11-13 Connection of GP-1850WDF/GP-1850WF to PCWaypoint data format Character available for comment11-14 Route data formatRoute comment format End of sentenceUsing C-MAP NT Model Inserting Chart CardLocation of chart card slot cover 12-1Cursor and Data Display 12-2Objects window Example of caution area windowTidal Information 12-312-4 Date windowSET GO to Method window Select Port Service window 12-5Sample filling station locations Make route windowSetting Chart Setup Options Lighthouse appearance when sector info is off12-6 Sector info12-7 Depth info displayDisplaying Program Number 12-8Memory, I/O test results Maintenance & Troubleshooting MaintenanceRecommended maintenance program 13-1Replacement of Fuse, Battery Simple TroubleshootingSimple troubleshooting plotter 13-2Error Messages Simple troubleshooting sounderError messages 13-3Diagnostic Tests 13-4Memory, I/O port test Test menu13-5 Keyboard testDisplay test Keyboard testRemote controller test Remote controller testClearing Memories 13-6Default settings shown in bold italic Menu TreeMenu Tree 2 By soft key Next Loran C Chains GRIDecca Chains Chain Location CodeWorld Time Geodetic Chart List OLD HAWAIIAN-OAThis page is intentionally left blank General Coating Color Index Index-1Index-2 IndicationsIndex-3 Index-4