Furuno GP-1650WF, GP-1650WDF manual Demonstration Display

1. OPERATIONAL OVERVIEW

1.8Demonstration Display

The demonstration display provides simulated operation of this unit. On the plotter display, own ship tracks, at the speed selected, a figure eight course or any course you enter, starting from position entered. All controls are operative; you may set destination, enter waypoints, etc. Simulated sounder operation is also provided.

1.Press the [MENU] key, followed by the CONFIGURATION and SYSTEM MENU soft keys to open the system menu.

2.Press the DEMONSTRATION MODE soft key to open the demonstration setting screen.

DEMO MODE	OFF		DEMO
			MODE
DEMO SPEED	10.0kt
DEMO COURSE	000.0°		EDIT
DEMO START LAT	34°	12.34'N
DEMO START LON	135° 12.34'E

DGPS 3D
	RETURN

Demo setting screen

3.Press ▲ or ▼ to select DEMO MODE.

4.Press the EDIT soft key to show the demo mode window.

DEMO MODE

▲

ON

OFF

▼

Demo mode window

5.Press ▲ to select ON.

6.Press the ENTER soft key or the [ENTER] key.

7.Select DEMO SPEED and press the EDIT soft key. Enter speed. Select digit with ◄/► and enter appropriate numeric value with the numeric keys.

8.Press the ENTER soft key or [ENTER] key.

9.Select DEMO COURSE and press the EDIT soft key. Select how you want the courseline to be traced; by FIGURE 8 or DIR.(ection). For DIR., enter course.

10.Press the ENTER soft key or [ENTER] key.

11.Select DEMO START LAT, and press the EDIT soft key. Enter latitude. Use the N< - > S soft key to switch coordinates if necessary.

12.Press the ENTER soft key or [ENTER] key.

13Select DEMO START LON, and press the EDIT soft key. Enter longitude. Use the E< - > W soft key to switch coordinates if necessary.

14.Press the ENTER soft key or [ENTER] key.

15.Press the RETURN soft key.

16.Press the [PLOT] soft key.

To cancel the demonstration display, set DEMO MODE to OFF.

1-6