Furuno GP-1650WF, GP-1650WDF manual Arrival Alarm, Anchor Watch Alarm

Page 64

9. PLOTTER ALARMS

9.3Arrival Alarm

The arrival alarm informs you that your boat is approaching a destination waypoint. The area that defines an arrival zone is that of a circle which you approach from the outside of the circle. The alarm will be released if your boat enters the circle. When the arrival alarm is active, a red dashed circle marks the arrival alarm area.

Alarm range

Own ship

: Alarm area	Destination
	waypoint

How the arrival alarm works

1.Press the [ALARM] key to open the alarm menu.

2.Press ▲ or ▼ to select ARRIVAL ALARM.

3.Press the EDIT soft key to show the arrival alarm window.

ARRIVAL ALARM

▲

ON 0.500nm

OFF

▼

Arrival alarm window

4.Press ▲ to select ON.

5.Operate the cursor pad to place the cursor on the digit desired.

6.Key in the alarm range desired. The arrival alarm range is 0.001 to 9.999 miles.

7.Press the ENTER soft key or the [ENTER] key.

9.4Anchor Watch Alarm

The anchor watch alarm informs you that your boat is moving when it should be at rest. When the anchor watch is active, a red dashed circle marks the anchor watch area.

Alarm setting

Your ship's position		: Alarm
where you start the		: Alarm
anchor watch alarm.		area

How the anchor watch alarm works

1.Press the [ALARM] key to open the alarm menu.

2.Press ▲ or ▼ to select ANCHOR ALARM.

3.Press the EDIT soft key to open the anchor alarm window.

ANCHOR ALARM

▲

ON 0.050nm

OFF

▼

Anchor watch alarm window

4.Press ▲ to select ON.

5.Key in the alarm range desired. The anchor watch range is 0.001 to 9.999 miles.

6.Press the ENTER soft key or the [ENTER] key to register your selection.

The anchor alarm range appears with the circle, its center is the own ship location when pressing the [ENTER] key. If own ship goes out this range, the alarm works.

9-2

Image 64

Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER 00080936100 Safety Instructions Table of Contents Iii RoutesForeword FeaturesWord to GP-1650WDF/1650WF Owners System Configuration Display UnitWhat is WAAS? Display Unit Controls Operational OverviewDisplay unit Inserting Mini Chart Card Adjusting Tone and Brilliance LON Menu Operation, Soft Keys Demonstration Display Principle of Operation Video Sounder OperationUnderwater conditions and video sounder display Normal sounder display indications, markers Sounder Display DescriptionKHz picture Selecting sounder display mode Sounder function windowMarker-zoom display plus normal sounder display Bottom-zoom display plus normal sounder displayDual-frequency Display Plotter/Sounder DisplayAutomatic Sounder Operation Manual Sounder OperationSelecting display range Adjusting the gainRange shifting Suppressing Interference Measuring DepthSuppressing Low Level Noise Erasing Weak Echoes White MarkerSelecting Picture Advance Speed Selecting Background and Echo ColorsAlarms Interpreting the Display Zero lineMinute mark Fish school echoesSurface noise/Aeration Surface noise/aerationPlotter Displays Presentation ModesNorth-up Course-upCursor Shifting the DisplayDisplaying Nav Information Window Turning on the cursor, shifting the cursorSelecting Chart Scale/Range Mini Chart CardsIndices and chart enlargement Chart icons and their meaningsRemarks on chart display Chart symbolsSample chart Japan and South Korea Showing indices Furuno chart symbolsPort service icons Nav-ChartsTMcards Aid to navigation dataNavigation Data Display Enlarging an indicationGPS satellite monitor display Navigation data displayHow to read the compass display Steering DisplayBeacon information display Beacon information displayHow to read the XTE indication Setting the range of the XTE scaleXTE range setting window Highway DisplayChanging Operation Mode Press the HIDE/SHOW keyResetting trip distance Selecting fishing 1, fishing 2 modeNavigation Trip Distance Track Changing Track Color Track Plotting Method, IntervalTrack plotting method Track color windowChanging Track Memory Capacity Track plotting intervalInterval window Track memory windowErasing Tracks Erasing tracks by areaErasing tracks by color Erasing all trackMark Entering MarksPlotter display Changing displays Plotter displayChanging Mark Attributes Video sounder displayChanging displays Video sounder display Mark/line windowChart details menu Changing Mark SizeMark line window Mark color windowDisplaying Track and Mark Points Erasing MarksTarget Mark Waypoints Entering WaypointsEntering waypoints at own ship’s position Entering waypoints at MOB positionWaypoints menu Waypoint windowMark shape selection window Mark color selection windowEntering waypoints by range and bearing Erasing Individual Waypoints Entering waypoints by latitude and longitude positionErasing waypoints by the cursor Erasing waypoints through the waypoint listChanging Waypoint Data Changing Waypoint Position on the Plotter DisplaySearching Waypoints Waypoint Mark SizeSearch window Routes Entering RoutesEntering routes through the route list Route menuEntering routes by the cursor Connecting RoutesConnect route window Inserting, Removing Waypoints Inserting waypoints through the route listChanging waypoints through the list Edit route menuInserting waypoints on the plotter display Removing waypoints from routesRoute contents display Creating Track-based RoutesSave route menu New route windowErasing Routes Navigation Navigating to Quick PointsSelecting quick point entry method Navigating to a single quick pointNavigating to Ports, Port Services Navigating to Waypoints waypoint listPlotter display Sample port list southern ItalySample port service list Sample filling station locations southern ItalyFollowing a Route Navigate along specific leg of routeRestarting navigation Navigate route waypoints in reverse order Setting speed for ETA calculation Switching waypoints Select speed for ETA window AutoCanceling Navigation Waypoint sw windowPlotter Alarms Audio Alarm On/OffAlarm menu Audio alarm windowArrival Alarm Anchor Watch AlarmSpeed Alarm XTE Cross Track Error AlarmProximity Alarm Alarm messages Alarm InformationAlarm messages and their meanings Memory Card Operations Formatting Memory Cards10-1 Download/upload menuSaving Data to Memory Card 10-2Saving data Save Data messageError messages Loading Data from Memory Card10-3 Data overwriteConfiguration 10-4Waypoint/route Mark/lineChart Setup Options menu Chart Offset menuCustomizing Your Unit 11-1Chart details menu description Chart Details menu11-2 Display Setup 1 menu description Display setup 1 menuDisplay Options menu 11-3Display Setup 2 menu description Display setup 2 menu11-4 Mag variation windowGPS Setup Options menu description GPS Setup options menu11.3 GPS/DGPS/TD Options menu 11-511-6 Geodetic datum window11-7 TD Setup menu 11-8Displaying Loran C TDs Displaying Decca TDsSounder Setup Options menu System Setup soft keyRange Setup soft key 11-911-10 Echo Offset 200kHz Echo Offset 50kHzSeabed LVL 200kHz, Seabed LVL 50kHz TVG conceptConfiguration menu Setup Nmea Port 1 menu descriptionSetup NMEA/DGPS Port 2 menu description 11-1111-12 UPLOAD/DOWNLOAD Data menuUpload/download menu Display unit, rear view11-13 Connection of GP-1650WDF/GP-1650WF to PCWaypoint data format Character available for comment11-14 Route data formatRoute comment format End of sentenceUsing C-MAP NT Model Inserting Chart CardLocation of chart card slot cover 12-1Cursor and Data Display 12-2Objects window Example of caution area windowTidal Information 12-3Date window 12-4SET GO to Method window Select Port Service window 12-5Sample filling station locations Make route windowSetting Chart Setup Options Lighthouse appearance when sector info is off12-6 Sector info12-7 Depth info display12-8 Displaying Program NumberMemory, I/O test results Maintenance & Troubleshooting MaintenanceRecommended maintenance program 13-1Replacement of Fuse, Battery Simple TroubleshootingSimple troubleshooting plotter 13-2Error Messages Simple troubleshooting sounderError messages 13-3Diagnostic Tests 13-4Memory, I/O port test Test menu13-5 Keyboard testDisplay test Keyboard testClearing Memories 13-6Chart Offset Track Control Menu TreeMenu Tree 2 By soft key Next Loran C Chains GRIDecca Chains Chain Location CodeWorld Time Geodetic Chart List OLD HAWAIIAN-OAThis page is intentionally left blank General Coating Color Index Index-1Index-2 IndicationsIndex-3 Index-4