Furuno GP-1650WF, GP-1650WDF manual Waypoints menu, Waypoint window, Mark shape selection window

6. WAYPOINTS

2.Press the WAYPOINTS soft key to display the WAYPOINTS menu.

ADD/EDIT/MOVE WAYPOINTS WPT

LOCAL LIST

ALPHA/NUMERIC LIST

WAYPOINT BY CURSOR

WAYPOINT BY RANGE & BEARING

	RETURN
DGPS 3D

Waypoints menu

3.Press the WAYPOINT BY CURSOR soft key. The plotter display appears.

4.Operate the cursor pad to place the cursor on the location desired.

5.Press the NEW WPT soft key. The waypoint window appears and it shows mark shape, waypoint name, comment (default: date), position of waypoint and proximity alarm radius.

MARK NAME NEW

WPT

	0 0 1 WPT
	SELECT
COMMENT	MARK

17:38	02JUN02	COORD
		TYPE

LAT		N<-->S
34 12. 345' N		E<-->W
LON
135 12. 3457' W		SAVE
PROXIMITY	0.00 nm
ALARM RADIUS
DGPS 3D		RETURN
Waypoint window

6.If you do not need to change the waypoint data, simply press the SAVE soft key to register the waypoint and return to the plotter display. If you want to change waypoint data as shown in the next several paragraphs, be sure to press the SAVE soft key only after changing all data you want to change.

Changing the shape and color of waypoint mark

1.Press the SELECT MARK soft key.

2.Press the MARK SHAPE soft key to open the mark shape selection window.

MARK SHAPE

Mark shape selection window

3.Operate the cursor pad to select shape desired.

4.Press the ENTER soft key or the [ENTER] key.

5.Press the SELECT MARK soft key.

6.Press the MARK COLOR soft key to open the mark color selection window.

SELECT COLOR

▲

RED

YELLOW

GREEN

LIGHT BLUE

PURPLE

BLUE

WHITE

▼

Mark color selection window

7.Press ▲ or ▼ to select the color desired, and then press the ENTER soft key or the [ENTER] key.

6-2