Furuno GP-1650WF manual Inserting waypoints on the plotter display, Removing waypoints from routes

7. ROUTES

Inserting waypoints on the plotter display

Inserting waypoints before the first waypoint or after the last waypoint

1.Press the [WPT/RTE] key followed by the ROUTES soft key to open the ROUTE menu.

2.Press ▲ or ▼ to select the route desired.

3.Press the EDIT ROUTE soft key.

4.Press the PLOT soft key to show the plotter screen.

5.Operate the cursor pad to place the cursor on the first or last waypoint of the route which you want to insert.

6.Press the ADD TO START (ADD TO END) soft key.

7.Operate the cursor pad to place the cursor on an existing waypoint (ADD WPT soft key appears) or new location (ADD NEW WPT soft key appears).

8.Press the ADD WPT (ADD NEW WPT) soft key.

9.Press the [ENTER] key.

When you want to insert waypoints after the last waypoint, press the “ADD TO END” soft key at step 6.

Inserting waypoints in an intermediate location within a route

1.Follow steps 1 through 4 in “Inserting waypoints before the first waypoint or after the last waypoint.”

2.Operate the cursor pad to place the cursor on a line connecting waypoints.

3.Press the SPLIT LEG soft key. The selected line turns red.

4.Operate the cursor pad to place the cursor on an existing waypoint (INSERT WPT soft key appears) or new location (INSERT NEW WPT soft key appears).

5.Press the appropriate soft key, INSERT WPT or INSERT NEW WPT.

Removing waypoints from routes

Removing route waypoints through the route list

1.Press the [WPT/RTE] key followed by the ROUTES soft key to open the ROUTE menu.

2.Press ▲ or ▼ to select the route desired.

3.Press the EDIT ROUTE and LOCAL LIST soft keys to show the waypoint list.

4.Press ▲ or ▼ to select the waypoint you want to delete.

5.Press the REMOVE WPT soft key.

Removing route waypoints from the plotter display

1.Press the [WPT/RTE] key followed by the ROUTES soft key to open the ROUTE menu.

2.Press ▲ or ▼ to select the route desired.

3.Press the EDIT ROUTE soft key.

4.Press the PLOT soft key to show the plot screen.

5.Operate the cursor pad to place the cursor on the waypoint you want to remove from the route.

6.Press the REMOVE WPT soft key.

7-4