Furuno GP-1650WDF, GP-1650WF manual Track

Page 37

4. TRACK

4.1Displaying Track

1.Press the [MENU] key to open the main menu.

MENU

CHART SETUP OPTIONS

DISPLAY OPTIONS

GPS/DGPS/TD OPTIONS

SOUNDER SETUP OPTIONS

DGPS 3D CONFIGURATION

Main menu

2.Press the CHART SETUP OPTIONS soft key to open the CHART SETUP OPTIONS menu.

CHART

SETUP

CHART OFFSET

TRACK CONTROL

CHART DETAILS

		RETURN
DGPS 3D		RETURN

Chart setup menu

3.Press the TRACK CONTROL soft key to open the TRACK CONTROL menu.

4.Press ▲ to select DISPLAY TRACK.

5.Press the EDIT soft key to show the display track window.

6.Press ▲ or ▼ to select ON or OFF as appropriate.

7.Press the ENTER soft key or the [ENTER] key.

8.Press the [PLOT] key to close the menu.

The default setting is ON, which traces ship’s track in accordance with ship’s movements.

Number of track and mark points used appears in the TRACK STATUS window on the TRACK CONTROL menu. Using the illustration at the bottom of the page as an example, it shows that 1000 out of 2000 track points and 5 out of 3000 mark shave been used.

4.2Stopping/Restarting Plotting of Track

When your boat is at anchor or returning to port you probably won’t need to record its track. You can stop recording the track, to conserve the track memory, as follows:

1. Press the [MENU] key followed by the

CHART SETUP OPTIONS and TRACK

CONTROL soft key.

	DISPLAY TRACK		ON
	DISPLAY TRACK		ON
	TRACK COLOR		WHITE
	PLOT		TIME
	TIME INTERVAL		01m00s
	DIST INTERVAL		00.10 nm
	TRACK MEMORY		2000 POINTS
	(MARK MEMORY) (3000) POINTS

	TRACK STATUS
	TRACKING
	TRACK : 1000 / 2000 PTS used
	MARK :	5 / 3000 PTS used

DGPS 3D

TRACK CONTROL

EDIT

STOP

TRACK

ERASE

T & M

RETURN

2. Press the STOP TRACK soft key. The

indication “TRACKING” in the TRACK

STATUS window changes to “NOT

TRACKING”.

On the plotter display, H icon appears.

To restart recording the track, press the START TRACK soft key at step 2 in the above procedure.

Track control menu

4-1

Image 37

Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER 00080936100 Safety Instructions Table of Contents Routes IiiForeword FeaturesWord to GP-1650WDF/1650WF Owners Display Unit System ConfigurationWhat is WAAS? Display Unit Controls Operational OverviewDisplay unit Inserting Mini Chart Card Adjusting Tone and Brilliance LON Menu Operation, Soft Keys Demonstration Display Principle of Operation Video Sounder OperationUnderwater conditions and video sounder display Normal sounder display indications, markers Sounder Display DescriptionKHz picture Sounder function window Selecting sounder display modeMarker-zoom display plus normal sounder display Bottom-zoom display plus normal sounder displayPlotter/Sounder Display Dual-frequency DisplayManual Sounder Operation Automatic Sounder OperationSelecting display range Adjusting the gainRange shifting Suppressing Interference Measuring DepthSuppressing Low Level Noise White Marker Erasing Weak EchoesSelecting Background and Echo Colors Selecting Picture Advance SpeedAlarms Zero line Interpreting the DisplayMinute mark Fish school echoesSurface noise/aeration Surface noise/AerationPresentation Modes Plotter DisplaysNorth-up Course-upShifting the Display CursorDisplaying Nav Information Window Turning on the cursor, shifting the cursorMini Chart Cards Selecting Chart Scale/RangeIndices and chart enlargement Chart icons and their meaningsChart symbols Remarks on chart displaySample chart Japan and South Korea Showing indices Furuno chart symbolsAid to navigation data Port service icons Nav-ChartsTMcardsEnlarging an indication Navigation Data DisplayGPS satellite monitor display Navigation data displaySteering Display How to read the compass displayBeacon information display Beacon information display Setting the range of the XTE scale How to read the XTE indication XTE range setting window Highway DisplayPress the HIDE/SHOW key Changing Operation ModeResetting trip distance Selecting fishing 1, fishing 2 modeNavigation Trip Distance Track Track Plotting Method, Interval Changing Track ColorTrack plotting method Track color windowTrack plotting interval Changing Track Memory CapacityInterval window Track memory windowErasing tracks by area Erasing TracksErasing tracks by color Erasing all trackEntering Marks MarkPlotter display Changing displays Plotter displayVideo sounder display Changing Mark AttributesChanging displays Video sounder display Mark/line windowChanging Mark Size Chart details menuMark line window Mark color windowDisplaying Track and Mark Points Erasing MarksTarget Mark Entering Waypoints WaypointsEntering waypoints at own ship’s position Entering waypoints at MOB positionWaypoint window Waypoints menuMark shape selection window Mark color selection windowEntering waypoints by range and bearing Entering waypoints by latitude and longitude position Erasing Individual WaypointsErasing waypoints by the cursor Erasing waypoints through the waypoint listChanging Waypoint Position on the Plotter Display Changing Waypoint DataSearching Waypoints Waypoint Mark SizeSearch window Entering Routes RoutesEntering routes through the route list Route menuEntering routes by the cursor Connecting RoutesConnect route window Inserting waypoints through the route list Inserting, Removing WaypointsChanging waypoints through the list Edit route menuRemoving waypoints from routes Inserting waypoints on the plotter displayCreating Track-based Routes Route contents displaySave route menu New route windowErasing Routes Navigating to Quick Points NavigationSelecting quick point entry method Navigating to a single quick pointNavigating to Waypoints waypoint list Navigating to Ports, Port ServicesPlotter display Sample port list southern ItalySample filling station locations southern Italy Sample port service listNavigate along specific leg of route Following a RouteRestarting navigation Navigate route waypoints in reverse orderSwitching waypoints Setting speed for ETA calculationSelect speed for ETA window AutoWaypoint sw window Canceling NavigationAudio Alarm On/Off Plotter AlarmsAlarm menu Audio alarm windowAnchor Watch Alarm Arrival AlarmSpeed Alarm XTE Cross Track Error AlarmProximity Alarm Alarm messages Alarm InformationAlarm messages and their meanings Formatting Memory Cards Memory Card Operations10-1 Download/upload menu10-2 Saving Data to Memory CardSaving data Save Data messageLoading Data from Memory Card Error messages10-3 Data overwrite10-4 ConfigurationWaypoint/route Mark/lineChart Offset menu Chart Setup Options menuCustomizing Your Unit 11-1Chart details menu description Chart Details menu11-2 Display setup 1 menu Display Setup 1 menu descriptionDisplay Options menu 11-3Display setup 2 menu Display Setup 2 menu description11-4 Mag variation windowGPS Setup options menu GPS Setup Options menu description11.3 GPS/DGPS/TD Options menu 11-5Geodetic datum window 11-611-7 11-8 TD Setup menuDisplaying Loran C TDs Displaying Decca TDsSystem Setup soft key Sounder Setup Options menuRange Setup soft key 11-9Echo Offset 200kHz Echo Offset 50kHz 11-10Seabed LVL 200kHz, Seabed LVL 50kHz TVG conceptSetup Nmea Port 1 menu description Configuration menuSetup NMEA/DGPS Port 2 menu description 11-11UPLOAD/DOWNLOAD Data menu 11-12Upload/download menu Display unit, rear viewConnection of GP-1650WDF/GP-1650WF to PC 11-13Waypoint data format Character available for commentRoute data format 11-14Route comment format End of sentenceInserting Chart Card Using C-MAP NT ModelLocation of chart card slot cover 12-112-2 Cursor and Data DisplayObjects window Example of caution area window12-3 Tidal InformationDate window 12-4SET GO to Method window 12-5 Select Port Service windowSample filling station locations Make route windowLighthouse appearance when sector info is off Setting Chart Setup Options12-6 Sector infoDepth info display 12-712-8 Displaying Program NumberMemory, I/O test results Maintenance Maintenance & TroubleshootingRecommended maintenance program 13-1Simple Troubleshooting Replacement of Fuse, BatterySimple troubleshooting plotter 13-2Simple troubleshooting sounder Error MessagesError messages 13-313-4 Diagnostic TestsMemory, I/O port test Test menuKeyboard test 13-5Display test Keyboard test13-6 Clearing MemoriesMenu Tree Chart Offset Track ControlMenu Tree 2 By soft key Next GRI Loran C ChainsChain Location Code Decca ChainsWorld Time OLD HAWAIIAN-OA Geodetic Chart ListThis page is intentionally left blank General Coating Color Index-1 IndexIndications Index-2Index-3 Index-4