Furuno GP-1650WDF, GP-1650WF 12-5, Select Port Service window, Sample filling station locations

Page 89

7.Press the NEAR SRVICE soft key. The SELECT PORT SERVICE window appears.

Currently selected icon

SELECT PORT SERVICE

Health emergency

SELECT PORT SERVICE window

8.Use the cursor pad to select service mark desired. Currently selected icon is circumscribed. The name of currently selected icon appears at the top of the window. Refer to the user's manual of C-MAP NT for details about the icons.

9.Press the ENTER soft key or the [ENTER] key. Then, the display shows the locations of those services nearest you.

 

 

 

 

 

 

GO TO

 

+

40˚45.971'N

FROM

0.26 nm

 

 

13˚57.462'E

OS

180.2˚

 

 

 

 

PUNTA CORNACCHIA

 

ACCO AMENO

ENTER

 

ISCHIA PORTO

 

CASAMICCIOLA

 

I. ISCHIA

CANCEL

SELECT ICON BY

 

DGPS 3D KEY.

GO TO

Sample filling station locations

10.Press ▲ or ▼ to place the "hand cursor" on the port service icon desired and press the ENTER soft key or the [ENTER] key.

12. USING C-MAP NT MODEL

+

40˚45.971'N

FROM

0.26 nm

GO TO

13˚57.462'E

QP<01>

180.2˚

 

 

 

 

 

ZOOM

 

 

 

 

IN

 

 

 

 

ZOOM

 

 

 

 

OUT

PUNTA CORNACCHIA

 

 

 

ACCO AMENO

 

ADD

 

 

ISCHIA PORTO

 

QP

 

 

 

 

 

 

 

 

ERASE

 

CASAMICCIOLA

 

LST QP

 

 

 

 

 

I. ISCHIA

 

CANCEL

DGPS 3D

USE SOFT KEYS TO MAKE

GO TO

ROUTE THEN PRESS "ENTER"

Make route window

11.Do one of the following:

Go directly to port service selected: Press the [ENTER] key. The own ship and the port service is connected by a blue line. The range and bearing from own ship to the port service appears at the navigation data display.

You can go to the port service directly by steering the ship to the heading indicated.

Go to port service selected via waypoints, make a route as follows:

a)Move the cursor to the nearest waypoint of the port service.

b)Press the soft key ADD QP.

c)Repeat the above steps a) and b) to enter other waypoints.

d)Press the [ENTER] key to finish. A line connects between own ship, waypoints and the port service. Further, the range and bearing from own ship to first waypoint appears.

Note: Destination is automatically cancelled if there is no port for service selected.

12-5

Image 89
Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER 00080936100 Safety Instructions Table of Contents Routes IiiWord to GP-1650WDF/1650WF Owners FeaturesForeword Display Unit System ConfigurationWhat is WAAS? Display unit Operational OverviewDisplay Unit Controls Inserting Mini Chart Card Adjusting Tone and Brilliance LON Menu Operation, Soft Keys Demonstration Display Underwater conditions and video sounder display Video Sounder OperationPrinciple of Operation KHz picture Sounder Display DescriptionNormal sounder display indications, markers Sounder function window Selecting sounder display modeMarker-zoom display plus normal sounder display Bottom-zoom display plus normal sounder displayPlotter/Sounder Display Dual-frequency DisplayManual Sounder Operation Automatic Sounder OperationRange shifting Adjusting the gainSelecting display range Suppressing Low Level Noise Measuring DepthSuppressing Interference White Marker Erasing Weak EchoesSelecting Background and Echo Colors Selecting Picture Advance SpeedAlarms Zero line Interpreting the DisplayMinute mark Fish school echoesSurface noise/aeration Surface noise/AerationPresentation Modes Plotter DisplaysNorth-up Course-upShifting the Display CursorDisplaying Nav Information Window Turning on the cursor, shifting the cursorMini Chart Cards Selecting Chart Scale/RangeIndices and chart enlargement Chart icons and their meaningsChart symbols Remarks on chart displaySample chart Japan and South Korea Showing indices Furuno chart symbolsAid to navigation data Port service icons Nav-ChartsTMcardsEnlarging an indication Navigation Data DisplayGPS satellite monitor display Navigation data displaySteering Display How to read the compass displayBeacon information display Beacon information displaySetting the range of the XTE scale How to read the XTE indicationXTE range setting window Highway DisplayPress the HIDE/SHOW key Changing Operation ModeNavigation Trip Distance Selecting fishing 1, fishing 2 modeResetting trip distance Track Track Plotting Method, Interval Changing Track ColorTrack plotting method Track color windowTrack plotting interval Changing Track Memory CapacityInterval window Track memory windowErasing tracks by area Erasing TracksErasing tracks by color Erasing all trackEntering Marks MarkPlotter display Changing displays Plotter displayVideo sounder display Changing Mark AttributesChanging displays Video sounder display Mark/line windowChanging Mark Size Chart details menuMark line window Mark color windowTarget Mark Erasing MarksDisplaying Track and Mark Points Entering Waypoints WaypointsEntering waypoints at own ship’s position Entering waypoints at MOB positionWaypoint window Waypoints menuMark shape selection window Mark color selection windowEntering waypoints by range and bearing Entering waypoints by latitude and longitude position Erasing Individual WaypointsErasing waypoints by the cursor Erasing waypoints through the waypoint listChanging Waypoint Position on the Plotter Display Changing Waypoint DataSearch window Waypoint Mark SizeSearching Waypoints Entering Routes RoutesEntering routes through the route list Route menuConnect route window Connecting RoutesEntering routes by the cursor Inserting waypoints through the route list Inserting, Removing WaypointsChanging waypoints through the list Edit route menuRemoving waypoints from routes Inserting waypoints on the plotter displayCreating Track-based Routes Route contents displaySave route menu New route windowErasing Routes Navigating to Quick Points NavigationSelecting quick point entry method Navigating to a single quick pointNavigating to Waypoints waypoint list Navigating to Ports, Port ServicesPlotter display Sample port list southern ItalySample filling station locations southern Italy Sample port service listNavigate along specific leg of route Following a RouteRestarting navigation Navigate route waypoints in reverse orderSwitching waypoints Setting speed for ETA calculationSelect speed for ETA window AutoWaypoint sw window Canceling NavigationAudio Alarm On/Off Plotter AlarmsAlarm menu Audio alarm windowAnchor Watch Alarm Arrival AlarmProximity Alarm XTE Cross Track Error AlarmSpeed Alarm Alarm messages and their meanings Alarm InformationAlarm messages Formatting Memory Cards Memory Card Operations10-1 Download/upload menu10-2 Saving Data to Memory CardSaving data Save Data messageLoading Data from Memory Card Error messages10-3 Data overwrite10-4 ConfigurationWaypoint/route Mark/lineChart Offset menu Chart Setup Options menuCustomizing Your Unit 11-111-2 Chart Details menuChart details menu description Display setup 1 menu Display Setup 1 menu descriptionDisplay Options menu 11-3Display setup 2 menu Display Setup 2 menu description11-4 Mag variation windowGPS Setup options menu GPS Setup Options menu description11.3 GPS/DGPS/TD Options menu 11-5Geodetic datum window 11-611-7 11-8 TD Setup menuDisplaying Loran C TDs Displaying Decca TDsSystem Setup soft key Sounder Setup Options menuRange Setup soft key 11-9Echo Offset 200kHz Echo Offset 50kHz 11-10Seabed LVL 200kHz, Seabed LVL 50kHz TVG conceptSetup Nmea Port 1 menu description Configuration menuSetup NMEA/DGPS Port 2 menu description 11-11UPLOAD/DOWNLOAD Data menu 11-12Upload/download menu Display unit, rear viewConnection of GP-1650WDF/GP-1650WF to PC 11-13Waypoint data format Character available for commentRoute data format 11-14Route comment format End of sentenceInserting Chart Card Using C-MAP NT ModelLocation of chart card slot cover 12-112-2 Cursor and Data DisplayObjects window Example of caution area window12-3 Tidal InformationSET GO to Method window 12-4Date window 12-5 Select Port Service windowSample filling station locations Make route windowLighthouse appearance when sector info is off Setting Chart Setup Options12-6 Sector infoDepth info display 12-7Memory, I/O test results Displaying Program Number12-8 Maintenance Maintenance & TroubleshootingRecommended maintenance program 13-1Simple Troubleshooting Replacement of Fuse, BatterySimple troubleshooting plotter 13-2Simple troubleshooting sounder Error MessagesError messages 13-313-4 Diagnostic TestsMemory, I/O port test Test menuKeyboard test 13-5Display test Keyboard test13-6 Clearing MemoriesMenu Tree Chart Offset Track ControlMenu Tree 2 By soft key Next GRI Loran C ChainsChain Location Code Decca ChainsWorld Time OLD HAWAIIAN-OA Geodetic Chart ListThis page is intentionally left blank General Coating Color Index-1 IndexIndications Index-2Index-3 Index-4