Furuno GP-1650WF, GP-1650WDF manual 12-4, Date window, SET GO to Method window

12. USING C-MAP NT MODEL

5.Press the DATE soft key to open the DATE window.

DATE

DD/MM/YYYY 01 / 01 / 2000

DATE window

6.Use ◄ or ► to position the cursor where desired and then press the appropriate numeric keys to enter a date.

7.Press the ENTER soft key or the [ENTER] key to show the tidal graph for entered date.

8.Press ◄ or ► to locate the vertical cursor on the time desired. Time and height are shown to the left of the graph.

9.Press ▲ or ▼ to shift the level cursor. Draught is shown to the left of the graph.

10.Press the CANCEL soft key to close the TIDE window.

12.4Navigating to Ports, Port Services

The C-MAP NT-FP chart provides detailed information on aids to navigation (buoy, lighthouse) and port service information. The port service information includes the availability of water and fuel supplies, shipyards, first aid, etc. You can use the list to set destination as follows:

1.Press the [MENU] key to open the main menu.

2.Press the DISPLAY OPTIONS soft key.

3.Press ▼ to select SET GO TO METHOD and press the EDIT soft key. The SET GO TO METHOD window appears.

SET GO TO METHOD

1 POINT

35POINT WPT/PORT SER

SET GO TO METHOD window

4.Press ▼ to select WPT/PORT SER and press the ENTER soft key or the [ENTER] key.

5.Press the [PLOT] key once or twice to return the plotter display.

6.Press the GO TO soft key. Soft key titles change. If the GO TO soft key is not

displayed, press the cursor pad.

+	40˚45.971'N	FROM	0.26 nm	GO TO
	13˚57.462'E	OS	180.2˚

QUICK

ROUTE

NEAR

SRVICE

PUNTA CORNACCHIA

ACCO AMENO

ISCHIA PORTO
CASAMICCIOLA
I. ISCHIA	CANCEL
DGPS 3D	GO TO

Plotter display

12-4