Furuno GP-1650WDF, GP-1650WF manual Plotter Alarms, Introduction, Audio Alarm On/Off, Alarm menu

Page 63

9. PLOTTER ALARMS

9.1Introduction

There are five plotter-related alarms which generate both audible and visual alarms: Arrival alarm, Anchor Watch alarm, XTE (Cross Track Error) alarm, Proximity alarm, and Speed alarm.

When an alarm setting is violated the buzzer sounds, and the speaker icon () appears in red. You may silence the alarm by pressing the [CLEAR] key. The icon remains on the screen until the cause of the alarm is removed or the alarm is deactivated.

9.2Audio Alarm On/Off

The audio alarm sounds whenever an alarm setting is violated. You can enable or disable the audio alarm as follows:

1.Press the [ALARM] key to show the ALARM menu.

AUDIO ALARM

ON

ALARM1

 

ARRIVAL ALARM

ON 0.100nm

 

ANCHOR ALARM

ON 0.050nm

EDIT

PROXIMITY ALARM ON

 

XTE ALARM

ON 0.100nm

 

SPEED ALARM

OVER/UNDER

 

 

12.5 ~ 15.0kt

CLEAR

 

 

ALARM INFORMATION

ALARM

 

NO ALARM

 

 

NEXT

DGPS 3D

 

 

PAGE

Alarm menu

2.Press ▲ or ▼ to select AUDIO ALARM.

3.Press the EDIT soft key to show the audio alarm window.

AUDIO ALARM

ON

OFF

Audio alarm window

4.Press ▲ or ▼ to select ON or OFF.

5.Press the ENTER soft key or the [ENTER] key to register your selection.

9-1

Image 63
Contents Color DGPS/PLOTTER/SOUNDER Color GPS/PLOTTER/SOUNDER 00080936100 Safety Instructions Table of Contents Routes IiiFeatures ForewordWord to GP-1650WDF/1650WF Owners Display Unit System ConfigurationWhat is WAAS? Operational Overview Display Unit ControlsDisplay unit Inserting Mini Chart Card Adjusting Tone and Brilliance LON Menu Operation, Soft Keys Demonstration Display Video Sounder Operation Principle of OperationUnderwater conditions and video sounder display Sounder Display Description Normal sounder display indications, markersKHz picture Bottom-zoom display plus normal sounder display Selecting sounder display modeSounder function window Marker-zoom display plus normal sounder displayPlotter/Sounder Display Dual-frequency DisplayManual Sounder Operation Automatic Sounder OperationAdjusting the gain Selecting display rangeRange shifting Measuring Depth Suppressing InterferenceSuppressing Low Level Noise White Marker Erasing Weak EchoesSelecting Background and Echo Colors Selecting Picture Advance SpeedAlarms Fish school echoes Interpreting the DisplayZero line Minute markSurface noise/aeration Surface noise/AerationCourse-up Plotter DisplaysPresentation Modes North-upTurning on the cursor, shifting the cursor CursorShifting the Display Displaying Nav Information WindowChart icons and their meanings Selecting Chart Scale/RangeMini Chart Cards Indices and chart enlargementFuruno chart symbols Remarks on chart displayChart symbols Sample chart Japan and South Korea Showing indicesAid to navigation data Port service icons Nav-ChartsTMcardsNavigation data display Navigation Data DisplayEnlarging an indication GPS satellite monitor displayBeacon information display How to read the compass displaySteering Display Beacon information displayHighway Display How to read the XTE indicationSetting the range of the XTE scale XTE range setting windowPress the HIDE/SHOW key Changing Operation ModeSelecting fishing 1, fishing 2 mode Resetting trip distanceNavigation Trip Distance Track Track color window Changing Track ColorTrack Plotting Method, Interval Track plotting methodTrack memory window Changing Track Memory CapacityTrack plotting interval Interval windowErasing all track Erasing TracksErasing tracks by area Erasing tracks by colorChanging displays Plotter display MarkEntering Marks Plotter displayMark/line window Changing Mark AttributesVideo sounder display Changing displays Video sounder displayMark color window Chart details menuChanging Mark Size Mark line windowErasing Marks Displaying Track and Mark PointsTarget Mark Entering waypoints at MOB position WaypointsEntering Waypoints Entering waypoints at own ship’s positionMark color selection window Waypoints menuWaypoint window Mark shape selection windowEntering waypoints by range and bearing Erasing waypoints through the waypoint list Erasing Individual WaypointsEntering waypoints by latitude and longitude position Erasing waypoints by the cursorChanging Waypoint Position on the Plotter Display Changing Waypoint DataWaypoint Mark Size Searching WaypointsSearch window Route menu RoutesEntering Routes Entering routes through the route listConnecting Routes Entering routes by the cursorConnect route window Edit route menu Inserting, Removing WaypointsInserting waypoints through the route list Changing waypoints through the listRemoving waypoints from routes Inserting waypoints on the plotter displayNew route window Route contents displayCreating Track-based Routes Save route menuErasing Routes Navigating to a single quick point NavigationNavigating to Quick Points Selecting quick point entry methodSample port list southern Italy Navigating to Ports, Port ServicesNavigating to Waypoints waypoint list Plotter displaySample filling station locations southern Italy Sample port service listNavigate route waypoints in reverse order Following a RouteNavigate along specific leg of route Restarting navigationAuto Setting speed for ETA calculationSwitching waypoints Select speed for ETA windowWaypoint sw window Canceling NavigationAudio alarm window Plotter AlarmsAudio Alarm On/Off Alarm menuAnchor Watch Alarm Arrival AlarmXTE Cross Track Error Alarm Speed AlarmProximity Alarm Alarm Information Alarm messagesAlarm messages and their meanings Download/upload menu Memory Card OperationsFormatting Memory Cards 10-1Save Data message Saving Data to Memory Card10-2 Saving dataData overwrite Error messagesLoading Data from Memory Card 10-3Mark/line Configuration10-4 Waypoint/route11-1 Chart Setup Options menuChart Offset menu Customizing Your UnitChart Details menu Chart details menu description11-2 11-3 Display Setup 1 menu descriptionDisplay setup 1 menu Display Options menuMag variation window Display Setup 2 menu descriptionDisplay setup 2 menu 11-411-5 GPS Setup Options menu descriptionGPS Setup options menu 11.3 GPS/DGPS/TD Options menuGeodetic datum window 11-611-7 Displaying Decca TDs TD Setup menu11-8 Displaying Loran C TDs11-9 Sounder Setup Options menuSystem Setup soft key Range Setup soft keyTVG concept 11-10Echo Offset 200kHz Echo Offset 50kHz Seabed LVL 200kHz, Seabed LVL 50kHz11-11 Configuration menuSetup Nmea Port 1 menu description Setup NMEA/DGPS Port 2 menu descriptionDisplay unit, rear view 11-12UPLOAD/DOWNLOAD Data menu Upload/download menuCharacter available for comment 11-13Connection of GP-1650WDF/GP-1650WF to PC Waypoint data formatEnd of sentence 11-14Route data format Route comment format12-1 Using C-MAP NT ModelInserting Chart Card Location of chart card slot coverExample of caution area window Cursor and Data Display12-2 Objects window12-3 Tidal Information12-4 Date windowSET GO to Method window Make route window Select Port Service window12-5 Sample filling station locationsSector info Setting Chart Setup OptionsLighthouse appearance when sector info is off 12-6Depth info display 12-7Displaying Program Number 12-8Memory, I/O test results 13-1 Maintenance & TroubleshootingMaintenance Recommended maintenance program13-2 Replacement of Fuse, BatterySimple Troubleshooting Simple troubleshooting plotter13-3 Error MessagesSimple troubleshooting sounder Error messagesTest menu Diagnostic Tests13-4 Memory, I/O port testKeyboard test 13-5Keyboard test Display test13-6 Clearing MemoriesMenu Tree Chart Offset Track ControlMenu Tree 2 By soft key Next GRI Loran C ChainsChain Location Code Decca ChainsWorld Time OLD HAWAIIAN-OA Geodetic Chart ListThis page is intentionally left blank General Coating Color Index-1 IndexIndications Index-2Index-3 Index-4