Kawai MP8II manual Selecting a Setup, Upper Second Third PROG#MSB-LSB

UPPER	SECOND	THIRD	PROG#:MSB-LSB
1	1	A	001:000-000
1	1	B	002:000-000
1	1	C	003:000-000
1	1	D	004:000-000
1	2	A~D	005:000-000 ~ 008:000-000
1	3	A~D	009:000-000 ~ 012:000-000
1	4	A~D	013:000-000 ~ 016:000-000
1	5	A~D	017:000-000 ~ 020:000-000
1	6	A~D	021:000-000 ~ 024:000-000
1	7	A~D	025:000-000 ~ 028:000-000
1	8	A~D	029:000-000 ~ 032:000-000
2	1~8	A~D	033:000-000 ~ 064:000-000
3	1~8	A~D	065:000-000 ~ 096:000-000
4	1~8	A~D	097:000-000 ~ 128:000-000
5	1~8	A~D	001:000-001 ~ 032:000-001
6	1~8	A~D	033:000-001 ~ 064:000-001
7	1~8	A~D	065:000-001 ~ 096:000-001
8	1~8	A~D	097:000-001 ~ 128:000-001

The transmitted program number is shown in the display.

You can also send program change numbers by using VALUE buttons.

Note:

Full program change numbers including bank numbers can be transmitted by setting them in MENU and saving it as a SETUP. See page35 for details.

2.9 Selecting a SETUP

The MP8II offers 256 preset combinations of the panel settings called SETUPs. To select a SETUP, press the SETUP button. Now the SOUND SELECT buttons are used to select a SETUP. Use a combination of the numbers in the upper, second and third rows to select a desired SETUP. The display will show the selected SETUP name.

To check the sound (internal) or program number (external) assigned to each zone, press the ZONE SELECT button. The display briefly shows the assigned sound name or program number, and then automatically returns to the SETUP name in a few seconds.

If you hold a ZONE SELECT button for 2 seconds the display will show you the key range information for that zone. You can also set the key range using the same procedure that is used in Sound mode.

20