Kawai MP8II manual EQ Bypass On/Off, Wheel Lock

Page 22

When the SW button is OFF: The display briefly shows as follows and the rotary speed changes to slow.

Note:

When the Rotary effect is not in use, the display briefly shows as follows.

3.4 EQ Bypass On/Off

You can temporarily bypass the EQ by turning the SW button on.

When the SW button is lit the EQ Bypass is on.

EQ Bypass On: The display briefly shows as follows and the sound bypasses the EQ.

EQ Bypass Off: The display briefly shows as follows and the EQ comes back to active.

Note:

When the EQ Bypass is turned on and the EQ control knobs are used, the display briefly shows as follows.

3.5 Wheel Lock

You can lock the bender wheel and modulation wheel to avoid unnecessary movement by accident.

When the SW button is lit the Wheel Lock is on.

Wheel Lock On: The display briefly shows as follows and the wheels are locked.

Wheel Lock Off: The display briefly shows as follows and the wheels are unlocked.

Note:

When the Wheel Lock is turned on and the wheels are used, the display briefly shows as follows.

22

Image 22
Contents Page Important Safety Instructions Is handled incorrectly Grounding Instructions Page Page Basic Features of the MP8II Welcome to the MP8IITable of Contents MP8II Midi Implementation Names and Functions Front PanelEffect Buttons Menu buttonsHeadphone Jack Turns the MP8II on or OFF Getting Ready What you need to know before startingSelecting a Sound Page Layer SplitMetronome Changing the Tempo/VolumePiano Only TransposeSelecting the Midi Channel Using the MP8II as a Midi controllerMidi Connection Sending Program Change NumberSelecting a Setup Upper Second Third PROG#MSB-LSBTouch Curve Panel LockRotary Slow/Fast EQ Bypass On/Off Wheel LockFoot Switch Lock Expression Pedal LockExternal Sequencer Start/Stop EFX EFX/REVERBEFX type Reverb type Auto WahRate 12.7Hz Send level Delay time 100 % Send levelEFX parameter list Rate 12.7HzReverb parameter list Quick Change Reverb OffsetEQ Equalizer Quick Change EQ OffsetMeans a slower attack is produced Midi CC# Control ChangeLevel makes the sound duller Sustain level of the soundChanging Midi CC parameter Zone parameters Int MenuZone parameters Ext Common parameters Edit Parameters Editing Procedure and ParametersZone Mode Sound Int onlyVoicing Int Piano only String Resonance Int Piano onlyKey-off Effect Int Piano only TX Ch Ext onlyTX Bank Ext only TX Prg # Ext onlyPrg # Ext only Bank MSB/LSB Ext onlyVelocity Switch Value Velocity SwitchKey Range Hi/Lo Velocity Offset Velocity CompressionZone Transpose Transmitting Control Change Ext only Transmitting Volume Ext onlyVolume 22 PanModulation Foot SwitchExpression Pedal BenderCommon Parameters Solo ModeStretch Tuning TemperamentFoot SW Control Change Number Tuning C BKey of Temperament EXP Control Change NumberMaster Volume Left Pedal ModeModulation Wheel Control Change Number Function SW setting see page21 Storing the settings as a SoundEFX/REVERB settings see page25 StoreStoring the Common settings Storing the settings as a SetupSystem Parameters SystemSystem Menu System ChannelTouch User TouchReverb Offset System TuningVolume Slider Action EQ Offset On/OffMidi program change numbers are assingned in On Multi-Timbral ModeSystem Ch Mode Please see page54 for Sound Program Number ListReceive Channel Out ModeFoot Switch Mode LCD ContrastSystem Dump Wheel ModeDump Mode Dump CurrentDump All Setup Dump All SoundReset One SOUND/SETUP System ResetReset All Setup Program Number Table OtherSound Program Number List MSB LSB MSB LSB MSB LSB MSB LSB MSB LSB Page Specifications Midi IN/OUT/THRUContents MP8II Midi ImplementationRecognized Data Channel Voice messageNrpn # Channel Mode Message Transmitted Data Only when rotary speaker selected Default = 40 00Hcenter Exclusive Data Sound Data Format Zone 1-4 Internal Data Control Change Number CC# Table Midi Implementation Chart Page Page OW1010E-I0704 KMSZ-0023