Kawai MP8II manual System Menu, System Parameters, System Channel

Page 45

8. SYSTEM

Use this mode to set the System parameters of MP8II.

To enter the SYSTEM mode, press the SYSTEM button.

8.1 System Menu

Use the MENU buttons to scroll through the System parameters.

[System Parameter]

System Channel

Touch

System Tune

Volume Slider Action

Reverb Offset

EQ Offset

Local Control On/Off

Multitimbre On/Off

System Channel Mode

Receive Channel On/Off

LCD Contrast

LED Brightness

Out Mode

Foot SW

Wheel Mode

Dump Mode

[System Dump]

Dump Current

Dump All Sound/Setup

[System Reset]

Reset One Sound/Setup

Reset All

Make sure the SYSTEM button is lit.

Press the MENU buttons until the parameter you want to edit appears in the display.

Set the value of the parameter by using the VALUE buttons.

The value range differs depending on the parameter.

8.2 System Parameters

The System Menu parameters are global and always stored automatically when leaving the SYSTEM mode, so there is no need to store them.

8.2.1 System Channel

This parameter sets the System MIDI channel on which System Exclusive messages are transmitted/received.

45

Image 45

Contents Page Important Safety Instructions Is handled incorrectly Grounding Instructions Page Page Welcome to the MP8II Basic Features of the MP8IITable of Contents MP8II Midi Implementation Front Panel Names and FunctionsMenu buttons Effect ButtonsHeadphone Jack Turns the MP8II on or OFF What you need to know before starting Getting ReadySelecting a Sound Page Split LayerPiano Only Changing the Tempo/VolumeMetronome TransposeMidi Connection Using the MP8II as a Midi controllerSelecting the Midi Channel Sending Program Change NumberUpper Second Third PROG#MSB-LSB Selecting a SetupPanel Lock Touch CurveRotary Slow/Fast Wheel Lock EQ Bypass On/OffExpression Pedal Lock Foot Switch LockExternal Sequencer Start/Stop EFX/REVERB EFXEFX type Auto Wah Reverb typeEFX parameter list Delay time 100 % Send levelRate 12.7Hz Send level Rate 12.7HzQuick Change Reverb Offset Reverb parameter listQuick Change EQ Offset EQ EqualizerLevel makes the sound duller Midi CC# Control ChangeMeans a slower attack is produced Sustain level of the soundChanging Midi CC parameter Menu Zone parameters IntZone parameters Ext Common parameters Zone Mode Editing Procedure and ParametersEdit Parameters Sound Int onlyKey-off Effect Int Piano only String Resonance Int Piano onlyVoicing Int Piano only TX Ch Ext onlyPrg # Ext only TX Prg # Ext onlyTX Bank Ext only Bank MSB/LSB Ext onlyVelocity Switch Velocity Switch ValueKey Range Hi/Lo Velocity Compression Velocity OffsetZone Transpose Volume Transmitting Volume Ext onlyTransmitting Control Change Ext only 22 PanExpression Pedal Foot SwitchModulation BenderStretch Tuning Solo ModeCommon Parameters TemperamentKey of Temperament Tuning C BFoot SW Control Change Number EXP Control Change Number Left Pedal Mode Master Volume Modulation Wheel Control Change Number EFX/REVERB settings see page25 Storing the settings as a SoundFunction SW setting see page21 StoreStoring the settings as a Setup Storing the Common settingsSystem Menu SystemSystem Parameters System ChannelUser Touch TouchVolume Slider Action System TuningReverb Offset EQ Offset On/OffSystem Ch Mode Multi-Timbral ModeMidi program change numbers are assingned in On Please see page54 for Sound Program Number ListFoot Switch Mode Out ModeReceive Channel LCD ContrastDump Mode Wheel ModeSystem Dump Dump CurrentDump All Sound Dump All SetupSystem Reset Reset One SOUND/SETUPReset All Other Setup Program Number TableSound Program Number List MSB LSB MSB LSB MSB LSB MSB LSB MSB LSB Page Midi IN/OUT/THRU SpecificationsMP8II Midi Implementation ContentsChannel Voice message Recognized DataNrpn # Channel Mode Message Transmitted Data Only when rotary speaker selected Default = 40 00Hcenter Exclusive Data Sound Data Format Zone 1-4 Internal Data Control Change Number CC# Table Midi Implementation Chart Page Page OW1010E-I0704 KMSZ-0023