Kawai MP8II manual EFX parameter list, Rate 12.7Hz Send level, Delay time 100 % Send level

5. Control Knobs

Select the function with the buttons on the left and use the knobs to change the values. You can also move the cursor with the MENU buttons and change the value with the VALUE buttons while the display is showing Control Knobs function.

5.1 EFFECT

Make sure that the EFFECT button in the CONTROL KNOBS section is lit. If the

EFFECT button is turned off, press it to turn it ON.

The CONTROL KNOBS are now active and assigned to the EFX/REVERB parameters for the selected zone. Use the CONTROL KNOBS to change the current settings.

EfR (EFX Rate) adjusts the value of the preset parameter for each EFX. (internal only)

EfD (EFX Depth) adjusts the depth of the EFX added to the sound. RvT (REVERB Time) adjusts the reverb time. (internal only)

RvD (REVERB Depth) adjusts the depth of the reverb added to the sound.

EFX parameter list

		EFX Rate			EFX Depth
1.	CHORUS	rate	0 -12.7Hz		send level
2.	FLANGER	rate	0 -12.7Hz		send level
3.	CELESTE	rate	0 -12.7Hz		send level
4.	ENSEMBLE	rate	0 -12.7Hz		send level
5.	DELAY 1	delay time	0 -100 (%)		send level
6.	DELAY 2	delay time	0 -100 (%)		send level
7.	DELAY 3	delay time	0	-100 (%)	send level
8.	DELAY 4	delay time	0 -100 (%)		send level
9.	AUTO PAN 1	rate	0	-12.7Hz	wet balance
10.	AUTO PAN 2	rate	0	-12.7Hz	wet balance
11.	AUTO PAN 3	rate	0	-12.7Hz	wet balance
12.	TREMOLO 1	rate	0	-12.7Hz	wet balance
13.	TREMOLO 2	rate	0	-12.7Hz	wet balance
14.	TREMOLO 3	rate	0	-12.7Hz	wet balance
15.	PHASER 1	rate	0 -12.7Hz		wet balance
16.	PHASER 2	rate	0 -12.7Hz		wet balance

27