Kawai MP8II TX Prg # Ext only, TX Bank Ext only, Bank MSB/LSB Ext only, Keyborad On/Off Ext only

Page 35

6.2.8 TX Prg # (Ext only)

This parameter determines if a Program Change Number will be transmitted (On) or not (Off) when a SETUP is recalled. If you want to switch sounds on external MIDI devices every time you call the Setup turn this parameter ON.

6.2.9 Prg # (Ext only)

This parameter determines which Program Change Number will be transmitted when a SETUP is recalled. When the TX Prg # is set to Off, this page won’t be displayed. Select the desired PRG number for the sound you want to select on the external MIDI device.

6.2.10 TX Bank (Ext only)

This parameter determines if Program Bank Numbers (MSB, LSB) will be transmitted (On) or not (Off) when a SETUP is recalled. If your external MIDI device requires a Bank Select message, turn on this function.

6.2.11 Bank MSB/LSB (Ext only)

This parameter determines which MSB and LSB Number will be transmitted when this SETUP is recalled. When the TX Bank is set to Off, this page won’t be displayed.

In the MIDI standard, there are 128 storage spaces. The number of storage spaces can be expanded using an MSB and an LSB.

This is a 3D image of the expanded program change system with the MSB and LSB. To use these efficiently and correctly, refer to the operation manual of any external MIDI sound modules that are connected to the MP8II.

6.2.12 Keyborad On/Off (Ext only)

This parameter determines whether or not note data generated by playing the keys on the MP8II will be transmitted to an external MIDI device. This parameter is useful when using 2 or more keyboards. When set to OFF the MP8II will not send any note data to an external MIDI device but the MP8II can still be used to adjust other connected keyboards or MIDI devices using the knobs, wheels etc.

35

Image 35

Contents Page Important Safety Instructions Is handled incorrectly Grounding Instructions Page Page Welcome to the MP8II Basic Features of the MP8IITable of Contents MP8II Midi Implementation Front Panel Names and FunctionsMenu buttons Effect ButtonsHeadphone Jack Turns the MP8II on or OFF What you need to know before starting Getting ReadySelecting a Sound Page Split LayerTranspose Changing the Tempo/VolumePiano Only MetronomeSending Program Change Number Using the MP8II as a Midi controllerMidi Connection Selecting the Midi ChannelUpper Second Third PROG#MSB-LSB Selecting a SetupRotary Slow/Fast Panel LockTouch Curve Wheel Lock EQ Bypass On/OffExpression Pedal Lock Foot Switch LockExternal Sequencer Start/Stop EFX type EFX/REVERBEFX Auto Wah Reverb typeRate 12.7Hz Delay time 100 % Send levelEFX parameter list Rate 12.7Hz Send levelQuick Change Reverb Offset Reverb parameter listQuick Change EQ Offset EQ EqualizerSustain level of the sound Midi CC# Control ChangeLevel makes the sound duller Means a slower attack is producedChanging Midi CC parameter Zone parameters Ext Common parameters MenuZone parameters Int Sound Int only Editing Procedure and ParametersZone Mode Edit ParametersTX Ch Ext only String Resonance Int Piano onlyKey-off Effect Int Piano only Voicing Int Piano onlyBank MSB/LSB Ext only TX Prg # Ext onlyPrg # Ext only TX Bank Ext onlyKey Range Hi/Lo Velocity SwitchVelocity Switch Value Zone Transpose Velocity CompressionVelocity Offset 22 Pan Transmitting Volume Ext onlyVolume Transmitting Control Change Ext onlyBender Foot SwitchExpression Pedal ModulationTemperament Solo ModeStretch Tuning Common ParametersEXP Control Change Number Tuning C BKey of Temperament Foot SW Control Change NumberModulation Wheel Control Change Number Left Pedal ModeMaster Volume Store Storing the settings as a SoundEFX/REVERB settings see page25 Function SW setting see page21Storing the settings as a Setup Storing the Common settingsSystem Channel SystemSystem Menu System ParametersUser Touch TouchEQ Offset On/Off System TuningVolume Slider Action Reverb OffsetPlease see page54 for Sound Program Number List Multi-Timbral ModeSystem Ch Mode Midi program change numbers are assingned in OnLCD Contrast Out ModeFoot Switch Mode Receive ChannelDump Current Wheel ModeDump Mode System DumpDump All Sound Dump All SetupReset All System ResetReset One SOUND/SETUP Other Setup Program Number TableSound Program Number List MSB LSB MSB LSB MSB LSB MSB LSB MSB LSB Page Midi IN/OUT/THRU SpecificationsMP8II Midi Implementation ContentsChannel Voice message Recognized DataNrpn # Channel Mode Message Transmitted Data Only when rotary speaker selected Default = 40 00Hcenter Exclusive Data Sound Data Format Zone 1-4 Internal Data Control Change Number CC# Table Midi Implementation Chart Page Page OW1010E-I0704 KMSZ-0023