Kawai MP8II manual Menu, Zone parameters Int, Zone parameters Ext Common parameters

Page 32

6. MENU

The MENU buttons allow access to the edit parameters in the MP8II. This collection of settings together with other editable parameters can be stored as a SETUP. The MP8II provides 256 SETUPs, and all are user programmable.

A SETUP consists of four zones. Each zone can be set as Internal, External or Both individually. Inside each of the four zones, a multitude of features and effects can be programmed and combined together into one exciting SETUP. A total of 256 SETUPs may be programmed in this way.

The menu consists of Internal parameters, External parameters and Common parameters.

Common parameter affect all zones. If a zone is set as Both, both the Internal parameters and External parameters are available for the zone.

Use the MENU buttons to scroll through all the different parameters.

In SOUND mode, both the Int Zone parameters and the Common parameters without the inverse “S(Setup)” icon can be individually stored. (See page43) The Int Zone parameters can be stored as a SOUND of the MP8II’s 256 SOUNDs. The Common parameters can be stored as the initial settings in SOUND mode.

Zone parameters (Int)

Mode

Sound Selection

Damper Reso. (Int Piano only) String Reso. (Int Piano only) KeyOff Effect (IntPiano only) Voicing (Int Piano only)

Key Range Hi/Lo Velocity Switch On/Off Velocity Switch Value Velocity Compression Velocity Offset

Zone Transpose Volume

Pan

Fine Tune

Damper Pedal On/Off/Hold Footswitch On/Off Expression Pedal On/Off Modulation On/Off Bender On/Off

Bender Range

Solo On/Off

Solo Mode

Zone parameters (Ext)

Common parameters

Mode

Master Volume

TX Channel

Left Pedal Mode

TX PRG # On/Off

M.Wheel CC#

PRG #

Expression Pedal CC#

TX Bank On/Off

Footswitch CC#

Bank Select MSB LSB

Temperament

Keyboard On/Off

Stretch Tuning

Key Range Hi/Lo

 

Velocity Switch On/Off

 

Velocity Switch Value

 

Velocity Compression

 

Velocity Offset

 

Zone Transpose

 

TX Volume On/Off

 

Volume

 

TX Controller On/Off

 

Pan

 

Fine Tune

 

Damper Pedal On/Off

 

Footswitch On/Off

 

Expression Pedal On/Off

 

Modulation On/Off

 

Bender On/Off

 

TX Bender Range On/Off

 

Bender Range

 

Solo On/Off

 

Solo Mode

 

Caution:

The edited settings will be erased when the power is turned off, or other sound is recalled. To save these settings, use the STORE procedure to save them as a SETUP. (See page43)

32

Image 32
Contents Page Important Safety Instructions Is handled incorrectly Grounding Instructions Page Page Basic Features of the MP8II Welcome to the MP8IITable of Contents MP8II Midi Implementation Names and Functions Front PanelEffect Buttons Menu buttonsHeadphone Jack Turns the MP8II on or OFF Getting Ready What you need to know before startingSelecting a Sound Page Layer SplitChanging the Tempo/Volume Piano OnlyMetronome TransposeUsing the MP8II as a Midi controller Midi ConnectionSelecting the Midi Channel Sending Program Change NumberSelecting a Setup Upper Second Third PROG#MSB-LSBRotary Slow/Fast Panel LockTouch Curve EQ Bypass On/Off Wheel LockFoot Switch Lock Expression Pedal LockExternal Sequencer Start/Stop EFX type EFX/REVERBEFX Reverb type Auto WahDelay time 100 % Send level EFX parameter listRate 12.7Hz Send level Rate 12.7HzReverb parameter list Quick Change Reverb OffsetEQ Equalizer Quick Change EQ OffsetMidi CC# Control Change Level makes the sound dullerMeans a slower attack is produced Sustain level of the soundChanging Midi CC parameter Zone parameters Ext Common parameters MenuZone parameters Int Editing Procedure and Parameters Zone ModeEdit Parameters Sound Int onlyString Resonance Int Piano only Key-off Effect Int Piano onlyVoicing Int Piano only TX Ch Ext onlyTX Prg # Ext only Prg # Ext onlyTX Bank Ext only Bank MSB/LSB Ext onlyKey Range Hi/Lo Velocity SwitchVelocity Switch Value Zone Transpose Velocity CompressionVelocity Offset Transmitting Volume Ext only VolumeTransmitting Control Change Ext only 22 PanFoot Switch Expression PedalModulation BenderSolo Mode Stretch TuningCommon Parameters TemperamentTuning C B Key of TemperamentFoot SW Control Change Number EXP Control Change NumberModulation Wheel Control Change Number Left Pedal ModeMaster Volume Storing the settings as a Sound EFX/REVERB settings see page25Function SW setting see page21 StoreStoring the Common settings Storing the settings as a SetupSystem System MenuSystem Parameters System ChannelTouch User TouchSystem Tuning Volume Slider ActionReverb Offset EQ Offset On/OffMulti-Timbral Mode System Ch ModeMidi program change numbers are assingned in On Please see page54 for Sound Program Number ListOut Mode Foot Switch ModeReceive Channel LCD ContrastWheel Mode Dump ModeSystem Dump Dump CurrentDump All Setup Dump All SoundReset All System ResetReset One SOUND/SETUP Setup Program Number Table OtherSound Program Number List MSB LSB MSB LSB MSB LSB MSB LSB MSB LSB Page Specifications Midi IN/OUT/THRUContents MP8II Midi ImplementationRecognized Data Channel Voice messageNrpn # Channel Mode Message Transmitted Data Only when rotary speaker selected Default = 40 00Hcenter Exclusive Data Sound Data Format Zone 1-4 Internal Data Control Change Number CC# Table Midi Implementation Chart Page Page OW1010E-I0704 KMSZ-0023