Kawai MP8II manual Modulation Wheel Control Change Number, Left Pedal Mode, Master Volume

6.3.7 Modulation Wheel Control Change Number

This parameter assigns a Control Change Number to the Modulation Wheel on the right side of the front panel.

See page72 for the list of Control Change numbers.

Note:

When the following Numbers are selected for the FootSW,EXP or Modulation

Wheel Control Change Number, the functions affect the internal sounds, too.

1.Modulation Wheel (MOD)

7.Volume (VOL)

10.Pan (PAN)

11.Expression Controller (EXP)

64.Damper Pedal (HLD)

66.Sostenuto (SST)

67.Soft Pedal (SFT)

6.3.8 Left Pedal Mode

This parameter determines whether the left pedal of the optional F-20 (twin pedal) accessory functions as Soft or Sost (Sostenuto).

Soft:	The Left Pedal works as a Soft Pedal ( Default ).
	When the Rotary EFX is in use, the Soft Pedal changes function to a Fast/Slow
	Rotor switch.
Sost:	The Left Pedal works as a Sostenuto Pedal.
	When the Damper setting ( see page38 ) is Off or Norm, the sosotenuto pedal
	works with natural decay. When the Damper setting is Hold, the sostenuto
	pedal works with a steady susutain level.

6.3.9 Master Volume

Adjust the total volume of the SETUP.

The value changes from 0 to 127.

42