3. SW Button
The SW button is a programmable realtime switch which can be assigned to one of 8 different functions.
Press and hold the SW button. The display shows the currently assigned function.
Press the SW button again to exit without changing the function.
Use the VALUE buttons to change the function. The display will automatically return to SOUND or SETUP mode after you change the function.
This function can be stored using the STORE button. (See page43)
When the MENU function is displayed, the SW button works as an EXIT button.
3.1 Panel Lock
You can lock the panel operation to avoid unnecessary changes to the settings by accident.
When the SW button is lit Panel Lock is ON.
Panel Lock On: All the operations except for keyboard, wheels, pedals and SW button are locked. The display shows as follows while the panel is locked.
Panel Lock Off: Panel Lock is canceled.
3.2 Touch Curve
You can temporary turn on/off the Touch Curve for example to play organ sounds correctly.
Touch Curve On: The display briefly shows the selected Touch Curve in the SYSTEM and the Touch Curve becomes active. If the selected Touch Curve in the SYSTEM is Off, the Normal Touch Curve becomes active.
Touch Curve Off: The display briefly shows as follows and the Touch Curve becomes Off.
3.3 Rotary Slow/Fast
You can switch the speed of roter between slow and fast when the Rotary effect is in use.
When the SW button is lit: The display briefly shows as follows and the rotary speed changes to fast.
21