Kawai MP8II Multi-Timbral Mode, System Ch Mode, Midi program change numbers are assingned in On

Page 48

8.2.9 Multi-Timbral Mode

Multi-Timbral Mode allows the MP8II to receive data on more than one MIDI channel simultaneously. In this mode, the MP8II can play different musical parts with different sounds for each part.

On1/2:	This is a flexible 16 part multi-timbral setup. (On 1 and On 2)
	MP8II’s normal program change numbers are assigned in On 1, and General
	MIDI program change numbers are assingned in On 2.
	(please see page54 for SOUND Program Number List.)
Off:	This turns off the multi-timbral capability. Only the system channel will be
	active and only the preset sound currently selected will be heard when a
	MIDI signal is received.

8.2.10 System Ch Mode

This parameter determines whether or not MIDI data received on the system channel will be sent to panel section (4zone setup internal section) when MultiTimbre is set to ON.

Panel:	MIDIdata received on the SystemCh is sent to panel section (Default).
	Use this setting to play your sound and setup patches (including effect/reverb
	settings) via MIDI on the system channel in Multi -Timbral mode.

Normal: The system channel receives MIDI data as part of a simple 16 part Multi- Timbral set up. When Normal is selected Sound and setup patch settings will not be used via MIDI.

When the Multi-Timbral Mode is set to Off, this page won’t be displayed.

Note:

When “Multi-Timbre=On” and “SysCh mode=Panel”, The Receive Channel parameter in the System menu will display an asterisk for the MIDI channel assigned to the System. The asterisk indicates that MIDI data received on this channel will be sent to the Panel section.

48

Image 48

Contents Page Important Safety Instructions Is handled incorrectly Grounding Instructions Page Page Basic Features of the MP8II Welcome to the MP8IITable of Contents MP8II Midi Implementation Names and Functions Front PanelEffect Buttons Menu buttonsHeadphone Jack Turns the MP8II on or OFF Getting Ready What you need to know before startingSelecting a Sound Page Layer SplitChanging the Tempo/Volume Piano OnlyMetronome TransposeUsing the MP8II as a Midi controller Midi ConnectionSelecting the Midi Channel Sending Program Change NumberSelecting a Setup Upper Second Third PROG#MSB-LSBPanel Lock Touch CurveRotary Slow/Fast EQ Bypass On/Off Wheel LockFoot Switch Lock Expression Pedal LockExternal Sequencer Start/Stop EFX/REVERB EFXEFX type Reverb type Auto WahDelay time 100 % Send level EFX parameter listRate 12.7Hz Send level Rate 12.7HzReverb parameter list Quick Change Reverb OffsetEQ Equalizer Quick Change EQ OffsetMidi CC# Control Change Level makes the sound dullerMeans a slower attack is produced Sustain level of the soundChanging Midi CC parameter Menu Zone parameters IntZone parameters Ext Common parameters Editing Procedure and Parameters Zone ModeEdit Parameters Sound Int onlyString Resonance Int Piano only Key-off Effect Int Piano onlyVoicing Int Piano only TX Ch Ext onlyTX Prg # Ext only Prg # Ext onlyTX Bank Ext only Bank MSB/LSB Ext onlyVelocity Switch Velocity Switch ValueKey Range Hi/Lo Velocity Compression Velocity OffsetZone Transpose Transmitting Volume Ext only VolumeTransmitting Control Change Ext only 22 PanFoot Switch Expression PedalModulation BenderSolo Mode Stretch TuningCommon Parameters TemperamentTuning C B Key of TemperamentFoot SW Control Change Number EXP Control Change NumberLeft Pedal Mode Master VolumeModulation Wheel Control Change Number Storing the settings as a Sound EFX/REVERB settings see page25Function SW setting see page21 StoreStoring the Common settings Storing the settings as a SetupSystem System MenuSystem Parameters System ChannelTouch User TouchSystem Tuning Volume Slider ActionReverb Offset EQ Offset On/OffMulti-Timbral Mode System Ch ModeMidi program change numbers are assingned in On Please see page54 for Sound Program Number ListOut Mode Foot Switch ModeReceive Channel LCD ContrastWheel Mode Dump ModeSystem Dump Dump CurrentDump All Setup Dump All SoundSystem Reset Reset One SOUND/SETUPReset All Setup Program Number Table OtherSound Program Number List MSB LSB MSB LSB MSB LSB MSB LSB MSB LSB Page Specifications Midi IN/OUT/THRUContents MP8II Midi ImplementationRecognized Data Channel Voice messageNrpn # Channel Mode Message Transmitted Data Only when rotary speaker selected Default = 40 00Hcenter Exclusive Data Sound Data Format Zone 1-4 Internal Data Control Change Number CC# Table Midi Implementation Chart Page Page OW1010E-I0704 KMSZ-0023