Pioneer DJM-5000 Additional information, Troubleshooting, About the exemption clauses

Page 17

Additional information

Troubleshooting

!Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Inspect the other components and electrical appliances being used. If the trouble cannot be rectified after checking the items below, ask your nearest Pioneer authorized service center or your dealer to carry out repair work.

!The player may not operate properly due to static electricity or other external influences. In such cases, normal operation may be restored by unplugging the power cord then plugging it back in.

Problem

Check

Remedy

The power is not turned on.

Is the power cord properly connected?

Plug in the power cord to an AC outlet.

 

 

 

No sound or small sound.

Is the position of the input selector switch properly set?

Switch the input source of a channel with the input selector switch (page

 

 

13).

 

 

 

 

Are the connection cables properly connected?

Connect the connection cables properly (page 8).

 

Are the terminals and plugs dirty?

Clean the terminals and plugs before making connections.

 

Is [MASTER ATT] on the rear panel set to a level like -12 dB?

Switch [MASTER ATT] (page 7).

 

 

 

Distorted sound.

Is the level of audio output from the microphone channel

Adjust the [LEVEL] dial for [MASTER] so that the master channel level

 

properly set?

indicator lights at about 0 dB at the peak level (page 13).

 

 

 

 

 

Set [MASTER ATT] to [-6 dB] or [-12 dB] (page 7).

 

Is the level of audio input to each channel properly set?

Adjust the [TRIM] control such that the channel level indicator lights up

 

 

near 0 dB at the peak level (page 13).

Can’t crossfade.

Is the crossfader assign switch properly set?

Set the crossfader assign switch properly for each channel (page 13).

 

 

 

Can’t fader start a DJ player.

Is [FADER START] set to off?

Set [FADER START] to on (page 14).

 

 

 

 

Is the DJ player properly connected to the [CONTROL]

Connect a DJ player to the [CONTROL] terminal with a control cord (page 8).

 

terminal?

 

 

 

 

 

Are the audio cables properly connected?

Connect this unit to the audio output terminal of a DJ player with an audio

 

 

cable (page 8).

 

 

 

No effect.

Is [EFFECT] set to a proper position?

Set [EFFECT] to a position other than [LOW] (page 13).

Can’t use an external effector.

Is [SEND/RETURN] [ON/OFF] set to on?

Press [ON/OFF] of [SEND/RETURN] to turn on [SEND/RETURN] (page 13).

 

 

 

 

Is the external effector properly connected to the [SEND]

Connect an external effector to the [SEND] or [RETURN] terminal. When the

 

or [RETURN] terminal?

connection is made properly, [ON/OFF] of [SEND/RETURN] lights up in red

 

 

(page 8).

 

Is the output channel switch of [SEND/RETURN] properly

Switch the output channel with the output channel selector switch(page 13).

 

set?

 

Distorted sound from an external effector.

Is the level of audio input from the external effector prop-

Turn the [LEVEL] dial for [SEND/RETURN] to adjust the audio level output

 

erly set?

from the external effector (page 13).

This unit is not recognized after it has been connected

Is the driver software properly installed on your computer?

Install the driver software. Reinstall it if the driver software has already been

to a computer.

 

installed (page 9).

 

 

Unless this unit is properly connected to the computer and there is no error

 

 

in data transmission, the version display utility program cannot display the

 

 

firmware of this unit. For details of how to check, see Checking the version of

 

 

the driver software on page 11.

 

 

 

English

About the exemption clauses

!Pioneer is a registered trademark of Pioneer Corporation.

!Microsoft®, Windows Vista®, and Windows® are registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

!Pentium is a registered trademark of Intel Corporation.

!Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

!Apple, Macintosh or Mac OS are registered trademarks of Apple Inc. in the United States and/or other countries.

!ASIO is a trademark of Steinberg Media Technologies GmbH.

!The names of companies and products mentioned herein are the trademarks of their respective owners.

This product has been licensed for nonprofit use. This product has not been licensed for commercial purposes (for profit-making use), such as broadcast- ing (terrestrial, satellite, cable or other types of broadcasting), streaming on the Internet, Intranet (a corporate network) or other types of networks or dis- tributing of electronic information (online digital music distribution service). You need to acquire the corresponding licenses for such uses. For details, visit http://www.mp3licensing.com.

The audio compression technology for MP3 is offered under the license of

Fraunhofer IIS and Thomson Multimedia.

En 17

Image 17
Contents DJM-5000 Information to User Ventilation Caution We Want You Listening For a Lifetime Contents What’s in the box FeaturesBefore start Rear Panel ConnectionsTo an AC outlet Connecting input terminalsConnecting output terminals Connecting a computer Connecting to the control panelAbout the USB audio driver software Software Use AgreementConnecting the DJM-5000 and computer Installing the driver softwareAdjusting the buffer size Windows About USB-MIDI channel settingChecking the version of the driver software Checking the latest information on the driver softwareMSB List of Midi MessagesControl Panel OperationsOperating the DJ section Using the microphone effect feature Using a microphoneUsing the talk-over feature Operating the MC sectionOperating the PA section About the exemption clauses TroubleshootingAdditional information CUE Block DiagramGeneral SpecificationsAudio Section Input / Output terminalsAvertissement Français Comment lire ce manuel SommaireMontage en rack conforme aux normes Contenu du carton d’emballage Informations préliminairesCaractéristiques Panneau arrière RaccordementsUne prise secteur Raccordement des prises d’entréeRaccordement des prises de sortie Raccordement à un ordinateur Raccordement au panneau de commandePropos du pilote audio USB Contrat d’utilisation du logicielRaccordement de la DJM-5000 et de l’ordinateur Précautions à prendre lors de l’installationInstallation du pilote Vérification de la version du pilote Propos du réglage du canal USB-MIDIRéglage de la taille de la mémoire tampon Windows Liste de messages Midi Opérations Panneau de commandeRestitution du son Fonctionnement de la section DJRéglage de la qualité du son Contrôle du son par un casqueUtilisation d’un microphone Fonctionnement de la section MCUtilisation de la fonction effets de microphone Utilisation de la fonction talkoverFonctionnement de la section PA Propos des clauses d’exemption Informations supplémentairesEn cas de panne Français Schéma fonctionnelGénéral SpécificationsSection audio Prises d’entrée/sortiePrinted Imprimé au
Related manuals
Manual 54 pages 23.01 Kb