Pioneer DJM-5000 operating instructions Contents

Contents

How to read this manual

The names of displays, menus, and buttons in this manual are enclosed in brack- ets. (e.g. [Collection] pane, [File] menu, [f])

Before start
Features	6
What’s in the box	6
Connections
Rear Panel	7
Connecting input terminals	8
Connecting output terminals	8
Connecting to the control panel	9
Connecting a computer	9
About the USB audio driver software	9
About USB-MIDI channel setting	11
Operations
Control Panel	13
Operating the DJ section	14
Operating the MC section	15
Operating the PA section	16
Additional information
Troubleshooting	17
About the exemption clauses	17
Block Diagram	18
Specifications	19

Mounting on a rack conforming to EIA standards

The screw holes on the left and right of the control panel of this unit match 5U size of any EIA standard 19-inch rack. The maximum depth of this unit is 225.1 mm.

!Secure this unit with screws (not supplied) matching the rack.

!Do not install this unit directly above a power amplifier. Heat radiating from the power amplifier may damage this unit. Also, noise (hum noise, etc.) may be generated.

!When transporting this unit, remove it from the rack. Transporting this unit without removing it from the rack may damage this unit.

!If you transport this unit without removing it from the rack, make sure vibration or shock is not applied to this unit.

English

En 5