English
2.Screw an supplied screw into the speaker mounting hole (lower of the two) at the top, rear of the flat screen
TV.
Do not tighten it all the way yet. Leave it loose, with about 5 mm left to tighten.
��������
����������������������
���� 
��������������
���������������������
����
���������������������������
3.Hang the speaker bracket on the screw you installed at the top by passing the wide part over it and lowering into the slot; screw in the
lower screw temporarily.
After passing the wide part of the hole of the speaker bracket (top) over the screw, lower the speaker onto it.
������������������
�����������������
���������������������
������������������
��������������������������
�������������������������
���������������������������
��������������������������
��������
4.Adjust the position of the speaker and then tighten the upper and lower screws firmly.
5.Tighten the two screws, at the top and bottom for each speaker (total of four screws), thus fixing the speakers to the flat screen TV.
6.Pass the supplied speaker cable between the speaker and the flat screen TV (below the speaker bracket) from below.
7.Connect the speaker cables to the speaker (see next page).
8.Insert the cable in the groove on the speaker.
�������������
����������������
�������������
������
9.Connect the other end of the speaker cables to the rear of flat screen TV (see next page).
4