Displays and Controls
(Single) | PREPARATION |
|
9MULTI-ROOM & SOURCE REMOTE IN terminal (see page 70)
Use this terminal to hook up a
10SPEAKERS terminals (see page 25)
Use these terminals to connect speakers to the receiver. The FRONT, CENTER and SURROUND terminals are for the main speaker system and the SURROUND BACK speakers can be set to either the main system, the SECOND ZONE, or the MULTI ROOM. See page 37 to set the SURROUND BACK speakers.
11AC OUTLET (switched, 100 W max)
Hook up an external component to the power supply of this receiver. Only do this with audio or video components being used in this system and never hook up heavy equipment (like TVs, heaters, air conditioners, refrigerators, etc.) to this receiver.
12DIGITAL IN terminals (see page 22)
Use these terminals to input the signal from a DVD, CD player or any other kind of digital player. To be able to play Dolby Digital and other surround soundtracks you need to make digital connections. To do this use the digital terminals here. If you don't connect as per the default settings (see page 23) you need to complete “Assigning the Digital Inputs” on page 81.
13 Audio input/output terminals (connect analog components here, see page 20)
Use these terminals to input/output the audio signal from analog components (like a cassette deck or turntable). These are analog jacks.
14Video components input/output termi- nals
Input/output signals from your video components (DVD, VCR, TV tuners, SAT tuners, etc.) here (see page 17).
15MULTI CH IN terminals (see page 21)
Use these terminals to input a multichannel surround signal (for example, a
16COMPONENT VIDEO IN terminals
Use these terminals to hook up the video connections of your video components with this high quality method. Your components will have to have the terminals as well to take advantage of this kind of connection. If you don't connect as per the default settings (see page 16) you need to complete “Assigning the Component Video Inputs” on page 82.
35