Pioneer VSX-53TX manual 12V Trigger function

Fine Tuning Your System

12V TRIGGER function

This feature allows you to hook up equipment (for example, a relay device) to this receiver that will send a power signal automatically when you select the function turned on here (for example, DVD/LD). To use this feature follow the steps below.

	Connect the equipment you want to use with this fea-
	ture to the 12V TRIGGER terminal on the back panel.
	1	Turn on the receiver and your TV,
		press RECEIVER on the remote con-
		trol.
	2	Press the SYSTEM SETUP button.
	3	Looking at the on-screen display on
		your TV, use the  buttons to select
3-7	2	12V TRIGGER. Press the ENTER
		button.
	4	Use the  buttons to select the
		component you want to use the 12V
		trigger with (for example, DVD/LD).
		Press ENTER.
	5	Use the  buttons to select the ON
		or OFF. Press ENTER.

3

4

ON: 12V TRIGGER function is activated.

OFF: 12V TRIGGER function is not activated.

6Repeat steps 4 and 5 to set 12V TRIGGER for as many terminals as you want.

7Use the  buttons to select EXIT and press ENTER. EXIT should be selected (if not, use the  buttons to select it). Press ENTER.

This exits the SYSTEM SETUP mode and returns to normal operation.

Memo:

•Use a mono mini cord to hook up the 12V TRIGGER equipment.

•DC OUT12V/100mA is the maximum power.

84