Pioneer VSX-53TX manual Assigning the Component Video Inputs, Component video input you want to

Fine Tuning Your System

Assigning the Component Video Inputs

This receiver has two component video inputs. Their default settings are video inputs for the DVD/LD (COMPONENT VIDEO IN 1) and TV/SAT (COMPONENT VIDEO IN 2) functions, but you can reassign them if you want to use them as video inputs for other receiver functions (for example a VCR).

See pages 16 and 17 for more on connecting equipment using component video cords.

	1	Turn on the receiver and your TV,
		press RECEIVER on the remote con-
		trol.
	2	Press the SYSTEM SETUP button.
	3	Looking at the on-screen display on
3-8	2	your TV, use the  buttons to select
		INPUT ASSIGN. Press the ENTER
		button.
	4	Use the  buttons to select
		COMPONENT–IN SELECT then press
		ENTER.
	5	Use the  buttons to select the
		component video input you want to
		reassign. Press the ENTER button.

3

4

5

6

6Use the  buttons to assign a receiver function.

Choose between DVD/LD, TV/SAT, VCR1 and VCR2.

7When you're finished use the  buttons to select EXIT and press

ENTER.

You will leave the COMPONENT–IN SELECT mode.

8Use the  buttons to select EXIT and press ENTER. Then, use the  buttons to select EXIT and press ENTER again.

This exits the SYSTEM SETUP mode and returns to normal operation.

Memo:

If you connect any source component to the receiver using a component video input, you should also have your TV connected to this receiver's component video output.

82