Pioneer VSX-53TX manual Surround Back System, If it isn’t use the  buttons to select it

Setting Up for Surround Sound

Surround Back System

This setup selects how your surround back system will be used. If you want to use it for surround back speakers in your main speaker system choose NORMAL SYSTEM. In this case you won’t have any B (or secondary) speaker system as these speakers fill that role also for the VSX-53TX. If starting fresh, complete steps 1-3 on page 36.

1	SURRBACK SYSTEM should be selected.
	If it isn’t use the  buttons to select it.
	Press the ENTER button.
	The setup possibilities appear on your TV.
2	Use the  buttons to select the
1-3	surround back system setting. Press the
	ENTER button.
	Choose from:
	NORMAL SYSTEM: if you want to use these speaker
	terminals for your surround back speakers in your main
	speaker system (referred to as the A speaker system).
	SECOND ZONE: if you want to use the these speaker
	terminals for an independent speaker system (referred to
	as speaker system B)
	MR&S: if you want to use these speaker terminals for a
	different, independent room. You can hear a completely
	independent source through these speakers but you will
1	need a separate IR receiver (see page 70).

3 EXIT should be selected. Press the ENTER button.

You will return to the SURROUND SETUP menu display.

Next, proceed to either AUTO SETTING (page 13) or

NORMAL (page 38).

If you want to change a setting before proceeding

2 start over from step 1.

SURROUND SETUP

3

37