Siemens 6SE7086-4AH85-1BA0 operating instructions Power connections, Fuses

Page 17

01.03

Connection

3.2Power connections

		DC-link	for M12		DC-link
		(DC output)			(DC output)
Common rectifier		C/L+	Regenerating unit		C/L+
		C/L+			C/L+
		D/L-			D/L-
		PE1			PE2
U1/L1	V1/L2	W1/L3	1U2/1T1	1V2/1T2	1W2/1T3
		for M12
	Mains		Autotransformer- / regen. system

Figure 3.1 Mains connection

The protective conductor is connected either via the sheet-steel housing in the case of cabinet installation or at the protective-conductor terminal on the right-hand side of the housing.

3.3Fuses

3.3.1Fuses for rectifier / regenerating unit

	Unit Order No.			Built-in branch fuses
				F111 to F162 or F211 to F262
	Basic unit			A			Type
	6SE7041-5EH85-1BA0		1000				R3047621 J M
	6SE7041-3FH85-1BA0		1000				R3047621 J M

	6SE7041-3HH85-1BA0		1000				R3047621 J M
	6SE7042-1EH85-1BA0		800				3NE3388-8
	6SE7042-0FH85-1BA0		800				3NE3388-8

	6SE7042-0HH85-1BA0		800			3NE3388-8
	6SE7042-8EH85-1BA0		1000				R3047621 J M
	6SE7042-8FH85-1BA0		1000				R3047621 J M

	6SE7042-7HH85-1BA0		1000				R3047621 J M

Siemens AG 6SE7086-4AH85-1BA0	ENGLISH	3-3
Common rectifier and rectifier/regenerating units with water cooling	Supplement to the operating instructions

Image 17

Contents Simovert Master Drives  Siemens AG 1997 All rights reserved ConformityEnglish Contents 01.03 Description Description 01.03 Assembly Unit Wall penetration Outgoing pipe Incoming pipe Coolant UseDefinition of cooling water BarFollowing table is a guideline coolant temperature 20 C Zinc breaks down all inhibitors which have a glycol basis Protection against moisture condensationCabinet design and connecting system English Dimension drawingDimension drawing, regenerating unit Connection Surge arresters can be ordered from Protective surge arrestersFuses Power connectionsBuilt-in brunch fuses for common rectifier AG1BA04AH85Siemens6SE7086ENGLISH Parallel unit PMU Operating instructions 6SE7086-4AH85-1BA0 Parallel unit Parallel unit Siemens AG 6SE7086-4AH85 Common rectifier PowerEnglish Common rectifier Thyristor replacement MaintenanceChanging fuses Dimensioning of the burden resistorsLocation of the burden resistors and fuses Equipment Designation Order number Used Identifier Spare partsSpare-parts 01.03 10-3 10-4 95,0% 92% 90,0% 85,0% 85% 80,0% Technical Data14-2 IIIDimensions, weight Losses, cooling, power factorLoad class II to EN 14-314-4 14-5 Losses, cooling14-6 Page Siemens Aktiengesellschaft Data edizione