08Controlling other equipment
3 Select the button you want to rename.
For example, choose the SEARCH MODE button if it was programmed with the ‘eject’ command from your DVD player’s remote.
KEY LABEL END
DVD
DVD | TV |
| CONT |
1 2 3 CLR
4 5 6 +10
7 8 9 0
SEARCH RETURN
MODE
•Remote control soft keys such as 
, 
, (cursor left/right) and TV CONT are used to select menu screens (even in learning mode), so therefore cannot be renamed.
•Press END to go back without making any changes.
4Choose how you want to change the look of the button.
DVD / LD
KEY LABEL
SEARCH
MODE
SELECT LABEL TYPE
TEXT : LARGE
TEXT : SMALL
GRAPHIC
5Edit the button as necessary. If you selected the text input method:
DVD/LD
KEY LABEL
A B C D E F G H I
J K L M N O P Q R
S T U V W X Y Z
SPACE CLEAR OK
•Use the letter and number buttons to spell out the name you want.
•Press SPACE to add a space in the name.
•Press CLEAR to delete characters one at a time.
• | Press | (small text only) to go to the next line. |
• | Use the | (cursor left/right) soft keys to go |
forward/back a screen.
If you selected the graphic input method:
DVD / LD
KEY LABEL
CLEAR OK
Select one of the following options:
•TEXT : LARGE – Select this if you want to input a short name, such as EJECT.
•TEXT : SMALL – Select this if the name is fairly long, for example, DVD Tray Eject.
•GRAPHIC – Select this if you want to replace the
button name with an icon, such as .
•Use the icon buttons to select a graphic.
•Press CLEAR to return to the original button appearance.
•Press 
to go back without editing the button.
6 Press OK when you’ve finished.
PLEASE WAIT shows in the remote display while the name or graphic is input and you’ll return to step 3.
Note
•With power buttons, you won’t be able to delete the ‘ ’ graphic. These buttons are best left for switching the component on or off.
•After confirming, you won’t be able to return to the original button appearance without resetting the remote control (as described on page 10).
70
En