Telex FMR-10, WT-10 Multiple System Setup & ClearScan, Potential Sources of Interference

Multiple System Setup & ClearScan™

ClearScan™ is most useful for finding operating frequencies for situ- ations where no more than 2 systems will be used simultaneously. When setting up more than 2 systems, use ClearScan™ to choose the first channel of operation. Set up subsequent systems following the channel groupings listed above in the “Using Multiple Wireless Sys- tems” section.

Potential Sources of Interference

There are many potential sources of interference for your wireless system. Any electronic product that contains digital circuitry includ- ing digital signal processors (reverb/multi-effects units), electronic keyboards, digital lighting controllers, CD players and computers, all emit RF energy that can adversely affect the performance of your wireless system. It is always best to place your receiver as far away from these devices as possible to minimize this potential source of problems.

-17-