Table of Contents, Quick System Setup Guide

	Table of Contents
Section	Page

1. Quick System Setup Guide . . . . . . . . . . . . . . . . . . . . . . . 1

2. System Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

3. Detailed system/component setup instructions . . . . . . . . 4 3.1. FMR-10 Receiver Setup and Operation . . . . . . . . . . 4 3.1.1 Rack Mount Installation . . . . . . . . . . . . . . . . . . . 7 3.1.2 Antenna Placement . . . . . . . . . . . . . . . . . . . . . . . 9 3.2. Handheld Transmitter Setup . . . . . . . . . . . . . . . . . . 11 3.3. Bodypack Transmitter Setup . . . . . . . . . . . . . . . . . 13

4. Guidelines/Recommendations for Best Performance . . 16

5. Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . 18

6. Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . 19 FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 Accessories and Replacement Parts. . . . . . . . . . . . . . . . 21

1. Quick System Setup Guide

Receiver Setup

1.Plug power supply cord into the back of the receiver and plug the power supply into an outlet. The channel display & red/green “Diversity” light on the receiver front panel should light up.

2.Attach the supplied 1/4 wave antenna’s to the FMR-10 receiver. Orient the receive antennas angled up and away from each other (at a 90 degree angle). For specific receiver setup information, re- fer to section 3.1 for the FMR-10 receiver. Assure that your trans- mitter(s) are turned OFF.

3.Depress “SET” button on front panel and release when channel display starts to flash (about 3 seconds). This activates “ClearScan™” to find an interference free channel for operation. Note the channel (0 - 9) shown on the receiver front panel channel display.

4.Connect receiver audio output to mixer or amplifier. Mute or re- duce mixer gain.

-1-