M-Audio 192s quick start Introduction, Minimum System Requirements, Installation procedures

English

Introduction

Thank you for choosing the M-Audio Audiophile 192 PCI interface, your professional solution for audio and MIDI performance with your computer and Digital Audio Workstation software.

This Quick Start Guide is designed to give you a basic overview of the Audiophile 192, to get you up and running quickly. Even if you are an experienced computer user and digital recording enthusiast, we suggest you take the time to read the accompanying Users’ Manual .PDF file, included on the AP192 CD. It will help you get the most out of

your Audiophile 192.

Minimum System Requirements

Please be sure that your computer meets these minimum system requirements before installing your AP192.

Windows

<Pentium 3 – 700 MHz or higher, 256 MB RAM (192 and 96kHz operation)

<Pentium 3 – 500 MHz or higher, 128 MB RAM (48kHz operation)

<DirectX 9.0b or higher

<Windows XP (SP1) or Windows 2000 (SP4)

<Available PCI slot

Macintosh

<Macintosh G4 733 MHz or higher

<512MB RAM

<Mac OS X Jaguar (10.2.8 or later) or Panther (10.3.4)

<Available PCI slot

Installation procedures

To Install the Audiophile 192

In all operating systems, begin by inserting the M-Audio Audiophile 192 driver CD-ROM into your computer’s CD-ROM drive, then browse to the installer file for your particular operating system. If your system has AUTORUN CD enabled, the installation wizard will take you through the install process step by step.

Once the software has been installed, open your computer and physically insert the Audiophile 192 firmly into an available PCI slot.

When hardware installation is complete, restart your computer and follow the instructions on completing the driver software installation.

5

AP192_QS_ML2.indd 5

10/28/04 1:53:12 PM