FRONT PANEL FEATURES
1.DJ Mic 1: This section has the gain and tone controls for the ¼”/XLR combination mic input.
2.Mic 2: This section has the gain and tone controls for Mic 2
3.Mic 3: This section has the gain and tone controls for Mic 3
4.Mic 2&3 Echo: This knob controls the echo effect amount on microphones 2 and 3.
5.Mic 2&3 Delay: This knob controls the delay time of the echo effect on microphones 2 and 3
6.Line Faders: Control volume levels in the mix.
7.Master Fader - Controls the overall output level.
8.Input toggle switch - Selects which source will be live to that channel based on what you have connected to the rear panel input section
9.Replaceable Crossfader - This slide fader blends audio between channels 1 and 2. This also switches the video when using compatible karaoke CD+G CDs.
Note: The crossfader is user replaceable in case of failure. Simply unscrew the
two large screws which hold it in place, lift it out and disconnect it’s cable. Re- attach the new crossfader and screw the mounting plate back onto the unit - you’re back in business!
10.Fader Start – Activation allows you to start the CD players from you crossfader. Travel from left to right will start the right CD player and pause the left CD player
11.LED METER - Indicates the Master output level.
12.Stereo/Mono toggle - Changes the Master output between Mono and Stereo
13.Master EQ Bass
14.Master EQ Middle
15.Master EQ Treble
16.Channel Cue Selector - Used to route channel audio to your headphones.
17.Headphone Level – Adjusts cue volume.
18.Headphone Jacks – Used to connect either 1/8” or 1/4” plugs for audio monitoring with headphones.
4