CD or CD+G Operation

ENGLISH

This unit is designed to play CDs and CD+Gs bearing the identification logo respectively. If the disc does not conform to the standard, it may not play properly.

TURNING POWER ON/OFF

To turn on the unit, press the ON/OFF button, the ON/OFF LED Indicator will light up.

To turn it off, press the ON/OFF button again, the ON/OFF LED Indicator will turn off.

LOADING A DISC

Open the CD door, place a CD or CD+G disc in the compartment with the printed side facing upward and the shiny side facing down.

Gently close the CD door. The monitor will display the total number of tracks. (If no disc is loaded, it will display “ ”.)

Note: - Never place anything except a compact disc in the disc tray. Foreign objects can damage the unit. - Only place one disc on the disc tray at a time.

(Refer to the Trouble Shooting Guide if a disc is loaded but the total tracks do not appear.)

PLAY/PAUSE

Adjust MASTER VOLUME control on your unit, TV or audio system to a comfortable level.

To start playing, press the PLAY/PAUSE button. The first track [ ] and the PLAY/PAUSE LED will be lit.

To temporarily stop playing, press the PLAY/PAUSE button. The PLAY/PAUSE LED Indicator will flash.

To resume play, press this button again.

Note: - Pressing pause repeatedly when a CD+G is playing may cause distorted lyrics on your TV screen. Any distortion will remain on the TV screen until it is refreshed either during an instrumental break or the song is stopped and/or the song is started from the beginning.

STOP

If the STOP button is pressed in the course of playing, the disc will cease to play. (The total number of tracks will be shown on the LED window.)

MASTER VOLUME

Rotate to the MASTER VOLUME control to obtain the desired sound level.

Note: The MIC Volume must be adjusted simultaneously with the master volume level.

SKIP (For both CD and CDG discs)

During STOP mode, you can skip forward or back to your desired track number by pressing the

SKIP buttons( - SKIP - ).

To resume playing the selected song, press PLAY/PAUSE button.

SEARCH (For audio CD disc only)

When playing any audio CD, press and hold the SKIP button ( -SKIP- ). The CD will search at high speed in the forward or backward direction. Normal play will continue when you release the button.

REPEAT

To repeat the track currently playing, press the REPEAT button once. The REPEAT LED will start to flash.

To repeat all tracks, press the REPEAT button twice. The REPEAT LED will light up and stay lit. Press the PLAY/PAUSE button to begin.

To clear the REPEAT function, press the REPEAT button again. The REPEAT LED will turn off.