SPECIFICATIONS
Nominal Out = +2 dBu (1 volt)
PREAMP SPECS
EIN:
PREAMP GAIN RANGE:
25 dB to 55 dB
INPUT IMPEDANCE: (MIC and LINE)
2,000 ohms (transformer balanced)
PHANTOM POWER:
+12 volts at Mic ± terminals
INPUT SENSITIVITY:
PRIORITY (Channels 1 & 2):
0 dB to 9 dB
LOW CUT FILTER:
COMMON MODE (rejection ratio):
GENERAL SPECS
OUTPUT IMPEDANCE (transformer balanced): 600 ohms (nominal)
DISTORTION:
< 0.1 % at nominal
FREQUENCY RESPONSE:
20 Hz to 20 kHz,
MAXIMUM OUTPUT LEVEL:
+20 dBu
+16 dBm (600 ohm load)
REMOTE VOLUME RANGE:
0 dB to 70 dB of attenuation
OFF CHANNEL ATTENUATION:
0 dB to
MUTE:
Channel is attenuated 45 dB when mute to ground connection is made.
MUTEBUS:
Multiple channels can be attenuated 45 dB when mutebus to ground connection is made.
STATUS OUPUT:
Status is low (0 V) when channel is active. It is high (3.8 V) when channel is not active.
POWER CONSUMPTION: |
|
AC 120 volts, 60 Hz | Domestic |
AC 230 volts, 50/60 Hz | Export |
15 watts |
|
WEIGHT: |
|
10.8 lbs |
|
DIMENSIONS:
3-1/2" H x 17" W x 10-1/8" D
TM®
Due to our efforts for constant improvements,
features and specifications listed herein are subject to change without notice.
10