GE X-9 owner manual Remembering and recalling EQ settings

Page 29

9 EQ

The left display and controls can be used for pro- grams 1 and 3, and the right for programs 2 and 4.

Use the selector switches to select the program.

Use the menu controls corresponding to the selector switch to view the settings for the equalization.

Note that the MONITOR setting has no meaning in this mode.

When the EFFECT key is off, and no menu settings are being made, turn the DATA knob until the HI, MID or LOW indicator is lit. The display shows the fre- quency currently set for the program.

Turning either the gain or the frequency control for the band changes the display to either the frequency or the gain for that band.

Remembering and recalling EQ settings

The menu system is used to store the EQ settings of the currently-selected program.

Use either the left or the right menu system for this function, depending on the program. The left display and menu system are used for programs 1 and 3, and the right display and menu system are used for pro- grams 2 and 4.

See “EQ memory store” on page 18 and “EQ mem- ory recall” on page 18 about menu functions 09 and

10for an explanation of how these are stored and recalled to the 100 memory banks.

All memories can be erased using the menu system (see “Clear all EQ memories” on page 20—24Ac)

TASCAM X-9Owner’s Manual 29

Image 29

Contents Professional Digital DJ Mixer Important Safety Precautions Important Safety Instructions Table of Contents Introduction Some notes and precautionsSerial number, etc Environmental considerationsProgram gain level, EQ and assignment section Getting acquainted withRoad map to front panel functions Cue selection keys and monitor keys Sampler sectionMicrophone control External effect Master faderProgram faders Effect, menu, etc. management Cross-fader and fader controlsRecord turntables ConnectionsCD decks, etc Digital connectionsMicrophone connection and use Booth outputsFootswitches Headphones connecting and usingExternal effects unit Fader start/stop connectionsTo use the external effects unit External effectsAbout programs Learning moreCross-fading Assigning sources to programsSignal flow Cue previewing sounds Adjusting the output volumePlaying a song Menu reference How the X-9 shows charactersMenus Values Program EQ QMeter release time Meter peak holdPresets Restore factoryMic balance Program 1 balanceProgram fader curve FadersProgram fader direction Fader startCross-fader reverse Cross-fader curveCross-fader start Selecting the effect type EffectsEditing the effects Beat parameterStoring effects Effect parametersLPFa Recalling stored effect settings Playing back samples SamplersRecording a sample Sample pitch Editing samplesErasing samples Cutting the EQ bands EQ Q settingViewing EQ settings Remembering and recalling EQ settings Specifications Specifications, etcAudio I/O Control I/OGeneral specifications Audio specificationsDimensional drawing Case mounting Mounting the X-9 in a rackEtc Block diagramPage Teac Corporation