Akai EWI5000 manual Assigning Controls, To set the Midi Channel

Page 26

Assigning Controls

There are three important settings you should set for your EWI5000: the MIDI channel it will use to send its messages, the function of the Hold Button, and the function of the Interval Button.

Additionally, you can assign the note keys to select specific Programs when you are touching the Program Button. This can make Program selection quick and easy.

Click one of the settings below to skip to that part of the chapter.

MIDI Channel

Hold Button

Interval Button

For reference, you can see an overview of the entire menu structure of Setup Mode in Appendix > Menu Structure > Setup Mode.

MIDI Channel

The EWI5000 will send MIDI messages over an assigned MIDI channel. This channel is also the synth's input channel.

To set the MIDI Channel:

1.Press and hold the Setup Button to enter Setup Mode.

2.Use the Hold Button or Interval Button to scroll through the options until CH (Channel) appears in the display.

3.Release the Setup Button. The current MIDI channel number will appear in the display.

4.Select the MIDI channel number you want by pressing the Hold Button (to increase the value) or Interval Button (to decrease the value).

5.Press the Setup Button to return to Performance Mode.

26

Image 26
Contents User Guide Table of Contents EWI About the EWI5000 SupportPower the EWI5000 Hold the EWI5000 ProperlyTo play EWI5000s audio wirelessly ConnectTo play EWI5000s audio through headphones To play EWI5000 as a wired Midi controllerGlide Plate Standard Pitch Pitch-Bend Up Pitch-Bend Down PlayTips Features Page Page Breath Adjusting Sound ParametersFilter BiteChorus FineReverb Adjusting Sensors To adjust the Note DelayTo adjust the breath sensor Breath SensorPage To adjust the bite sensor Bite SensorPage To adjust the pitch-bend plates Pitch-Bend PlatesGlide Plate To set the function of the glide platePage To calibrate the note keys and Program Button Key Delay Note Keys and Program ButtonCalibrating Sensors To calibrate the breath sensor To calibrate the glide plate To calibrate the pitch-bend plates To set the Midi Channel Assigning ControlsMidi Channel To set the function of the Hold Button Off The Hold Button will be disabledHold Button Page Interval Button To set the function of the Interval ButtonPage Selecting Programs Using the Program ButtonManaging Programs Release the Program Button Using the Hold Button and/or Interval ButtonUsing the Note Keys To save a Program An External Midi Sound Module or SoftwareSaving Programs To edit the Reverb effect Using Effects FXReverb Chorus DelayTo edit the Delay effect To edit the Chorus effectTo select a fingering mode Fingering ModesUpdating the Firmware Restoring Default SettingsTo update the EWI5000s software Fingering Charts K1 K2 K3 K4 K5 K6 K10 K11 K12EWI Saxophone Flute Oboe EVI EVI ReversedSetup Mode Menu StructuresMenus Values Menus Values FX Effects Technical Specifications Trademarks and LicensesAkaipro.com