Akai EWI5000 manual Managing Programs, Selecting Programs, Using the Program Button

Page 31

Managing Programs

Programs are settings or presets stored in the EWI5000's internal memory. You can switch from one Program to another to change your sound and sensor settings instantly.

There are two banks of Programs: the Preset Bank and the User Bank. In each bank, there are 100 Programs (0099). By default, the two banks are identical, but you can overwrite User Programs with your own Programs, while the Preset Programs cannot be overwritten.

To view the current Program, simply touch the touch the Program Button (the screw just above the Pitch-Bend Up Plate).

To switch between the Preset Bank and User Bank, simply press the Bank Button. The LED next to the currently selected bank will light up.

Learn more about Selecting Programs or Saving Programs in this chapter.

Selecting Programs

You can select Programs in one of three ways:

Using the Program Button

Using the Hold Button and/or Interval Button

Using the Note Keys

You can also use the EWI5000 to select Programs In an External MIDI Sound Module or Software.

Using the Program Button

1.Make sure you are in the desired bank (Preset or User). If not, press the Bank Button to select it.

2.Without touching any note keys, touch the Program Button (the screw just above the Pitch-Bend Up Plate). The current Program will appear in the display.

3.While still touching the Program Button, press the Hold Button to move to the next Program, or press the Interval Button to move to the previous Program.

4.When you see the desired Program in the display, release the Program Button. The Program is now selected.

Note: While touching the Program Button, no sound will play if you blow into the mouthpiece.

31

Image 31
Contents User Guide Table of Contents EWI Support About the EWI5000Hold the EWI5000 Properly Power the EWI5000Connect To play EWI5000s audio wirelesslyTo play EWI5000 as a wired Midi controller To play EWI5000s audio through headphonesTips PlayGlide Plate Standard Pitch Pitch-Bend Up Pitch-Bend Down Features Page Page Bite Adjusting Sound ParametersFilter BreathReverb FineChorus To adjust the Note Delay Adjusting SensorsBreath Sensor To adjust the breath sensorPage Bite Sensor To adjust the bite sensorPage Pitch-Bend Plates To adjust the pitch-bend platesTo set the function of the glide plate Glide PlatePage Calibrating Sensors Key Delay Note Keys and Program ButtonTo calibrate the note keys and Program Button To calibrate the breath sensor To calibrate the glide plate To calibrate the pitch-bend plates Midi Channel Assigning ControlsTo set the Midi Channel Hold Button Off The Hold Button will be disabledTo set the function of the Hold Button Page To set the function of the Interval Button Interval ButtonPage Managing Programs Using the Program ButtonSelecting Programs Using the Note Keys Using the Hold Button and/or Interval ButtonRelease the Program Button Saving Programs An External Midi Sound Module or SoftwareTo save a Program Reverb Using Effects FXTo edit the Reverb effect To edit the Chorus effect DelayTo edit the Delay effect ChorusFingering Modes To select a fingering modeTo update the EWI5000s software Restoring Default SettingsUpdating the Firmware K1 K2 K3 K4 K5 K6 K10 K11 K12 Fingering ChartsEWI Saxophone Flute Oboe EVI Reversed EVIMenu Structures Setup ModeMenus Values Menus Values FX Effects Trademarks and Licenses Technical SpecificationsAkaipro.com