Akai To play EWI5000s audio through headphones, To play EWI5000 as a wired Midi controller

Page 7

To play EWI5000's audio through headphones:

1.Connect standard 1/8" (3.5mm) stereo headphones to EWI5000's Phones jack.

2.Press the EWI5000's Power Button to power it on.

3.Set the EWI5000's Wireless Switch to Off.

To play EWI5000 as a "wired" MIDI controller:

1.Make sure EWI5000 is powered off. If it is not, press and hold the Power Button for a full second.

2.Use the included USB cable to connect the EWI5000's USB port to your computer.

3.Make sure the EWI5000's Wireless Switch is set to Off.

Important: In this mode, by default, the EWI5000 will not send out any audio signal. You can enable or disable audio by pressing and holding the Power Button until the Preset LED or User LED lights solid (audio is enabled) or flashes (audio is disabled).

7

Image 7
Contents User Guide Table of Contents EWI Support About the EWI5000Hold the EWI5000 Properly Power the EWI5000Connect To play EWI5000s audio wirelesslyTo play EWI5000 as a wired Midi controller To play EWI5000s audio through headphonesTips PlayGlide Plate Standard Pitch Pitch-Bend Up Pitch-Bend Down Features Page Page Bite Adjusting Sound ParametersFilter BreathReverb FineChorus To adjust the Note Delay Adjusting SensorsBreath Sensor To adjust the breath sensorPage Bite Sensor To adjust the bite sensorPage Pitch-Bend Plates To adjust the pitch-bend platesTo set the function of the glide plate Glide PlatePage Calibrating Sensors Key Delay Note Keys and Program ButtonTo calibrate the note keys and Program Button To calibrate the breath sensor To calibrate the glide plate To calibrate the pitch-bend plates Midi Channel Assigning ControlsTo set the Midi Channel Hold Button Off The Hold Button will be disabledTo set the function of the Hold Button Page To set the function of the Interval Button Interval ButtonPage Managing Programs Using the Program ButtonSelecting Programs Using the Note Keys Using the Hold Button and/or Interval ButtonRelease the Program Button Saving Programs An External Midi Sound Module or SoftwareTo save a Program Reverb Using Effects FXTo edit the Reverb effect To edit the Chorus effect DelayTo edit the Delay effect ChorusFingering Modes To select a fingering modeTo update the EWI5000s software Restoring Default SettingsUpdating the Firmware K1 K2 K3 K4 K5 K6 K10 K11 K12 Fingering ChartsEWI Saxophone Flute Oboe EVI Reversed EVIMenu Structures Setup ModeMenus Values Menus Values FX Effects Trademarks and Licenses Technical SpecificationsAkaipro.com