Farallon Communications NetopiaTM manual Connecting the S/T interface connector and RJ-45 cable

INSTALLATION 9

S/T INTERFACE

Outside of North America, ISDN connections are made using the S/T interface. Plug the RJ-45 cable into your ISDN wall jack. Then connect the cable to the RJ-45 port on the S/T interface connector.

Connecting the S/T interface connector and RJ-45 cable

In Australia, a different S/T interface is used, and a terminating resistor may be required. The illustration below shows how the Australian ISDN S/T interface connector, the terminating resistor, and the RJ-45 cable connect together. For more information about terminating resistors, see the README.TXT file on the Netopia ISDN PC Card Disk 1.

Connecting the S/T interface connector, terminating resistor, and RJ-45 cable