20 CHAPTER 3
PROFILE CONFIGURATION
Netopia ISDN PC Card configuration settings are saved into pro- files. Your Netopia ISDN PC Card is already equipped with a fac- tory profile which requires only your ISDN information to establish a connection. Using the factory profile as a basis, you can create your own profile. Up to three
To configure a profile, follow the steps below.
1.In the Netopia ISDN PC Card Properties screen, click Profile Properties. The Profiles window appears:
2.Select a profile from the list, then click Configure Profile.
3.The Profile Configuration window appears. The North Ameri- can and International firmware versions each have their own screen. If your current geographic location differs from the firmware loaded in your Netopia ISDN PC Card, refer to the “Updating firmware” section later in this chapter.
