Chapter 5. Trigger Settings [TRIGGER]
Eliminate Crosstalk Between Pads [F4 (XTALK)]
When two pads are mounted on the same stand, hitting one pad may trigger the sound from another pad unintentionally. (This is called crosstalk.) Eliminate this by adjusting Xtalk Cancel on the pad that is sounding inadvertently.
In some cases, you can prevent crosstalk between two pads by increasing the distance between them.
1.Press [TRIGGER] - [F4 (XTALK)].
2.Use
3.Strike the pad you wish to set.
The cursor will move to the trigger input number for the struck pad.
You can also select by using [CURSOR] or [TRIG SELECT].
4.Use
5.When you’re finished, press [EXIT] to return to the “DRUM KIT” screen.
[F1 (XTALK)]: XTALK CANCEL
[F2 (MOUNT)]: MOUNT TYPE Select the pad mount type here. PAD: Using a pad mount CYMBAL: Using a cymbal mount
[F3 (GROUP)]: XTALK GROUP
Crosstalk Cancel affects the pads set to the same number.
Chapter 5 | [TRIGGER] |
|
|
Crosstalk Example: If you hit the snare pad and the tom 1 also sounds
Set the snare and tom 1 to the same group. Raise the “XTALK CANCEL” for the pad being used for the tom 1. The tom 1 pad will be less prone to receive crosstalk from other pads. With a setting “OFF,” crosstalk prevention will not work.
*If the value is set too high, and two pads are played simultaneously, the one that is struck less forcefully may not sound. Be careful and set this parameter to the minimum value required to prevent crosstalk.
47