Chapter 10. Settings for the Entire TD-20 [SETUP]
MIDI Settings and Operations [F1 (MIDI)]
Setting the MIDI Channels for Each Part [F1 (MIDI CH)]
For each part, you can specify the channel on which the
1.Press [SETUP].
[SETUP] lights.
2.Press [F1 (MIDI)] - [F1 (MIDI CH)].
The “MIDI CHANNEL” screen appears.
3.Press [CURSOR (up/down)] to select the part you wish to set.
4.Press [CURSOR (left/right)] to select the parameter.
5.Use
3.Press [CURSOR (up/down)] to select the parameter.
4.Use
Parameter | Value |
|
|
Soft Thru | OFF, ON |
Local Control | OFF, ON (DRUM), ON (PERC) |
Device ID | |
Soft Thru
This section explains how you can use the Roland
When Soft Thru is set to “ON,” the messages received at MIDI IN will also be transmitted from the MIDI OUT/THRU connector.
Pad or pedal |
|
|
|
Parameter | Value | Description |
|
|
|
Tx/Rx | OFF, ON | Turns the transmitting and |
|
| receiving MIDI messages |
|
| ON or OFF. |
Channel | transmit and receive channel |
*Drum kit part and percussion part can be overlaid and set to “CH10.” When a duplicate note number is received, the instrument assigned to the drum kit part (the pad instrument) sounds. Other note number is received, the percussion part instrument is played.
*Other parts and MIDI channels cannot be overlaid.
TRIGGER
INPUT MIDI IN
MIDI OUT
To the MIDI IN of another sound module or sampler
MIDI
OUT/THRU
MIDI Settings for the Entire TD-20 [F2 (GLOBAL)]
1.Press [SETUP].
[SETUP] lights.
2.Press [F1 (MIDI)] - [F2 (GLOBAL)].
The “MIDI GLOBAL” screen appears.
74