Chapter 9. Using a CompactFlash Memory Card [CARD]
Naming a Backup [F4 (NAME)]
Each backup area can be given a name of up to 12 characters.
1.In the “CARD SAVE” confirmation screen, press [F4 (NAME)].
The “CARD SAVE NAME” screen appears.
2.Press [CURSOR (left/right)] to move the cursor to the character to be changed.
3.Use [VALUE],
Function Buttons
[F1 (INSERT)]
A blank space is inserted at the cursor position, and characters after this point are moved to the right one space.
[F2 (DELETE)]
Character at the cursor position is deleted, and characters after this point are moved to the left one space.
[F3 (SPACE)]
Character at the cursor position is replaced by a blank space.
[F4 (CHAR)]
Type of character at the cursor position changes between upper case/lowercase alphabet, or numbers and symbols.
4.When you’re finished, press [EXIT] to return to the confirmation screen.
Loading Data from a Memory Card [F2 (LOAD)]
Data saved on a memory card can be loaded into the
1.Insert the CompactFlash card into the CompactFlash card slot on the
2.PRESS [CARD].
[CARD] AND the CompactFlash indicator light, and the “CARD MENU” screen appears.
3.Press [F2 (LOAD)].
The “CARD LOAD” screen appears.
4.Use
5.Press [F5 (LOAD)].
The confirmation screen appears.
*To cancel, press [F1 (CANCEL)].
6.Press [F5 (EXECUTE)] to load the data.
*You can also load individual kits, percussion sets, etc. from a memory card. To do so, use the Copy function (p. 69).
9 | [CARD] |
Chapter |
71