Chapter 6. Sequencer (Playback)
Tempo Adjustment
1.Press [TEMPO].
2.[TEMPO] lights, and the “TEMPO” screen appears.
3.Use
4.Press [EXIT] to return to the “DRUM KIT” screen.
Setting the Tempo by Hitting a Pad (Tap Tempo)
You can set the tempo by hitting a pad or [PREVIEW] two or more times at
1.Press [TEMPO].
[TEMPO] lights, and the “TEMPO” screen appears.
2.Press [F3 (TAP)].
The “TAP TEMPO” screen appears.
3.Press [CURSOR (up)] to move the cursor to “Tap Switch.”
4.Use
5.Press [CURSOR (down)] to move the cursor to “Tap Pad.”
6.Use
7.Press [KIT] to return to the “DRUM KIT” screen.
When you hit the pad (or [PREVIEW] selected in the step 5,
the tempo is displayed at the upper right of the display.
Synchronizing with an External MIDI Device
This section discusses the settings that allow an external MIDI sequencer and the
1.Press [TEMPO].
[TEMPO] lights, and the “TEMPO” screen appears.
2.Press [F2 (SYNC)].
The “TEMPO SYNC” screen appears.
3.Use
4.Press [KIT] to return to the “DRUM KIT” screen.
Parameter | Value | Description |
|
|
|
|
|
Sync Mode | INTERNAL, EXTERNAL, | See below. |
|
| AUTO, REMOTE |
| 6 |
|
| Chapter [PLAY] | |
The | |||
INTERNAL: |
|
|
|
recording. When shipped from the factory, this setting is selected.
EXTERNAL:
The
AUTO:
This is a convenient setting that combines features of both the INTERNAL and EXTERNAL settings. When no synchronization signal is being received, the
REMOTE:
The
Synchronizing to the playback of an external sequencer
In this case, the
1.Connect the
2.Set Sync Mode to “EXTERNAL.”
3.Begin playback on the external sequencer.
Synchronized playback will begin.
53