Chapter 10. Settings for the Entire
MIDI Messages for Detailed Performance Expressions [F3 (CTRL)]
1.Press [SETUP].
[SETUP] lights.
2.Press [F1 (MIDI)] - [F3 (CTRL)].
The “MIDI CONTROL” screen appears.
3.Press [CURSOR (up/down)] to select the parameter.
4.Use
Parameter | Value | Description |
|
|
|
Pedal CC | OFF, | Control change used |
| MODULATION(1), | for transmitting/re- |
| BREATH(2), | ceiving the depth to |
| FOOT(4), | which the |
| EXPRESSION(11), | pedal pressed |
Snare CC | GENERAL1(16)– | Control change used |
| GENERAL4(19) | for transmitting/re- |
Ride CC | ||
|
| ceiving the strike po- |
Toms CC |
| |
| sition of the snare, | |
|
| |
|
| ride, and tom |
HH Note# | See below. | |
Border |
|
|
*When a control change is set to be more than one parameter, an asterisk (*) appears at the right of the unavailable parameter.
HH Note# Border
(Hi-Hat Note Number Border)
The only time you would need to change this setting is when you are triggering an external sound module.
The note number transmitted when you strike the
At the factory default value (127), the closed
If you change the
Switching Drum Kits via MIDI (Program Change) [F4 (PROG)]
Each drum kit/percussion set has its own program change
number.
1.Press [SETUP].
[SETUP] lights.
2.Press [F1 (MIDI)] - [F4 (PROG)].
The “MIDI PROGRAM CHANGE (DRUM KIT)” or “MIDI PROGRAM CHANGE (PERC SET)” screen appears.
3.Press [F3 (DRM KIT)], [F4 (PRC GRP)], and [CURSOR (up/down)] to select the drum kit or percussion set you wish to set.
[F3 (DRM KIT)]: Drum Kit
[F4 (PRC GRP)]: Percussion Set
4.Use
The drum kits/percussion sets will switch when a Program Change message is received from an external MIDI device. When you switch
Turning the Reception/Transmission of Program Changes On/Off
In the “MIDI PROGRAM CHANGE (DRUM KIT)” or “MIDI PROGRAM CHANGE (PERC SET)” screen, pressing [F1] turns the reception of program changes on or off, and pressing [F2] turns the transmission on/off.
76